CableIQ cable tester CIQ-100 | CIQ-KIT

Overview

• Verification-check whether the bandwidth of the existing cabling system supports voice, 10/100, VoIP, or Gigabit Ethernet
• Fault Diagnosis-shows why the existing cabling system cannot support network bandwidth requirements, for example, there is a crosstalk at 11 meters)
• Search-detect the device connected to the other end of the cable and display the device configuration speed/duplex mode/line pair)
• Identifies unused switch ports for easy redistribution
• The smart wiring diagram graphically shows the wiring diagram configuration and the distance to the fault point.
• Test all types of copper cable media: twisted pair wires, coaxial cables, and audio cables
  

Features
CableIQ is the first cabling system maintenance instrument designed for network maintenance personnel who need to maintain and authenticate the bandwidth of the cabling system. Even a newbie, CableIQ can let him know the network speed supported by the current wiring system, quickly distinguish between cable faults and network faults, and search for the connection status at the other end of the cable. This means that network engineers can effectively reduce the occurrence of faults, quickly solve faults, and make the existing wiring system more efficient.

Http://anheng.com.cn/products/17/152.html  

Reduce up to 30% of faults that need to increase the severity level

Http://anheng.com.cn/products/17/152.html  

CableIQ's powerful fault diagnosis function and intuitive user interface can help frontline network maintenance personnel fully diagnose wiring system problems. Is the port enabled? Does the duplex settings match? Is it a network problem or a cable problem? Can cables support the required network bandwidth? CableIQ is the only instrument that can answer all these questions before raising the severity level of network faults to the next stage.

Features:

Use smart wiring diagrams to isolate faults more easily 

Http://anheng.com.cn/products/17/152.html  

Test the length, short circuit, string winding, or open circuit of the smart wiring diagram, and graphically display the fault location of a root line. For example, the first line is disconnected at 10 meters.
The smart wiring diagram of CableIQ shows that the remote 6th-pin open path of the tested cable is 34 meters ).

Speed/Duplex mismatch can be detected within several seconds

Http://anheng.com.cn/products/17/152.html  

Checks the duplex settings of a PC and compares them with the vswitches connected to it. Detects 10/100/Mbps switches and NICs.

Bandwidth Authentication 

Http://anheng.com.cn/products/17/152.html  

Check the network speed supported by your existing cabling system.

Http://anheng.com.cn/products/17/152.html  

When deploying a VoIP or Gigabit network, you must ensure that the existing wiring system can meet the bandwidth requirements of new devices. Although your cabling system is certified, the movement, addition, and change of the site may make many links unable to meet the required speed. CableIQ can quickly show whether a link containing a Jumper can meet application requirements such as voice, 10/1000/1000 Mbit/s Ethernet, and VoIP. Understanding the bandwidth of the cabling system before the upgrade can prevent long downtime in the future and avoid wasting unnecessary troubleshooting time.

Http://anheng.com.cn/products/17/152.html  

The four-second automated test of CableIQ clearly marks the network speeds and running applications supported by the cables under test.

Simple and Easy-to-use performance can enhance the efficiency of frontline maintenance personnel 

Http://anheng.com.cn/products/17/152.html  

The intuitive user interface and graphic Result Display enable users to use the service without training or training in a very short time.

• Easy to learn and use with knob switch-the current test mode of the tester can be seen at any time

• Portable, lightweight, and sturdy ergonomic design for on-site use

• 4 AA batteries, power-saving design can support testing for several weeks

• The remote adapter is used to test the existing copper cabling system and can also be used as a protective cover for the instrument.

User feedback: "I took a CableIQ to our third-level institute of technology. They learned about different features within two minutes and started to use the instrument for testing ."
-- Telecom Analysis Expert

　

Excellent precision helps you precisely locate Cables 

　

CableIQ's groundbreaking intelliitone Digital Signal technology can work with the intelliitone audio probe to track network cables and precisely locate cables even in messy wiring rooms.

　

CableIQ supports intelliitone Digital Audio Technology

　

• Easier cable search, with higher tracking accuracy than similar tools on the market
• Allows you to securely issue audio tracing cables on the active network.
• Two digital tones and four simulated tones
• Intelliitone cable graphics; Use the intelliitone 200 audio probe to verify the wiring diagram after tracing the cable

Cable Fault Diagnosis 

Http://anheng.com.cn/products/17/152.html  

The cable fault diagnosis time can be halved.

Http://anheng.com.cn/products/17/152.html  

CableIQ can display the bandwidth required by the cabling system, and provide detailed information about the cable status and Fault Location of the cabling system. The smart wiring diagram test function graphically displays the status of the cable and identifies fault locations such as open and short circuits. Advanced diagnostics can also identify other faults, such as crosstalk and large impedance changes. The built-in smart digital audio technology allows you to use the audio tracing cable without disconnecting the cable from the network. With the help of CableIQ, network maintenance personnel can reduce the time needed to diagnose cable faults by half.