Caution when using battery maintenance errors

Although many people usually pay attention to the maintenance of the laptop battery, there are still a lot of battery power storage capabilities drop sharply, and even the phenomenon of no power-on, battery decommission.

There are also problems with static battery

Many laptop users always connect their batteries to their laptops, whether on-premises or in-room, so some users question that this will consume the battery life, it is best to remove the battery from the current and use an external power supply. In fact, this approach has both the right side and the wrong side. Yes, it will definitely reduce the battery charge and discharge times. The error is that many users may not use the battery once in a few months, but may cause damage.

In fact, the biggest threat to the battery is the temperature, as long as the body temperature is high without a battery, you can maximize the protection of the battery. For example, if you play games and run large software for a long time in this book in summer, the temperature in this book will be very high. In this case, you can remove the battery from this book and use the external power supply.

DetectionProgramUnreliable

The deviation discharge is an important reason for battery life, but most users only rely on the power detection program provided by the system to determine whether the battery should be charged. This actually poses a certain risk, because the accuracy of the system tool detection will gradually decrease as the number of charge and discharge times increases. The best way is to start regular deep discharge at the early stage of the laptop purchase. For example, a deep discharge is performed on the battery 30 times after normal charging to achieve the purpose of calibration accuracy.

When performing the deep discharge operation, first charge the battery capacity to 100%, continue charging for 2 hours, set the current battery to 3% in the power management program to bring the system to sleep, and then use the current properly until the automatic shutdown. It takes about five hours for the current instance to sleep and the battery is charged to know that the power usage reaches 100%.

TIPS: Professional Software helps you maintain this battery

Batterycare helps you maintain your battery. The "Battery status" column in the "Basic Information" Panel of the main window displays the current battery, battery available time, battery charge/discharge status, and other information. The battery discharge information is displayed in the dsicharges information column. In the "dsichange cycles progress" column, the current discharge cycle count and the preset total discharge cycle count are displayed. When the two are the same, the deep discharge operation can be performed. The bottom of the window shows CPU and hard disk problems. When the temperature is too high, it is best to unplug the fully filled battery.

In addition, we can perform some minor adjustments. Click the "setting" button at the top of the window, and select the "Low battery level notification" option in the "notifications" area in the setting window, indicates a warning message is displayed when the battery power is low (25% by default. In the "Number of discharge cycles until notification" column of the "advanced" panel, you can set the total number of charge/discharge cycles (30 by default ).