CCB Card reader can read the ID card but the computer can't display parsing

Scope of application:

Bank

Knowledge Point Analysis:

This situation is that the information on the card reader can not be uploaded to the computer, the problem has the computer part and the reader part, only need step-by-step troubleshooting can find the crux and solve.

Operation Steps:

There are two aspects of the above: computer setup problems and reader settings.

Computer: This step requires the bank staff to cooperate, the computer has a port number and a transfer port number needs to be set, because the data line from the card reader is connected to a computer's port, if the computer's port filling settings and hardware ports do not match, so the computer is definitely not receive the information card reader, Port and easy to find, from the reader on the data line to pull out the first interface, the interface is a serial port, the above labeled a number such as 3 or 4. This is the reader and the computer connection port number, and then let the bank staff to set up on the line. This is due to computer-related setup problems resulting from the solution.

Card reader: The reader module consists of a LCD screen and a reader, usually set the LCD screen first, in turn, press the top left corner of the LCD screen, upper right, bottom left, next right, and then pop up a conversation window--Select the first row of the third row of the parameter settings--the first line is the upper machine baud rate Set---Press the last ellipsis, Modify to 115200 (the default is 9600), save the exit, and submit the changes in the Parameters Settings window, then exit the settings, put the ID card should be OK. If not, replace a good LCD or card reader and try again (this setting does not matter with the card reader, all data is in the LCD screen).