Cdlinux MINIWDEP Configuring the Wireless Card

Cdlinux MINIWDEP Configuring the Wireless Card

Material: Virtual machine vmvare

Cdlinux image File

USB network Card (support Cdlinux external network card, here with the rt3070, drive-free, can be directly identified)

1 new Cdlinux, configuring Cdlinux network devices

After setting the configuration, in the new Cdlinux right-click Settings, set the Cdlinux network connection to the bridging mode.

2 Setting up a virtual machine network

Vmnet is set to bridge mode, bridge to the USB wireless card, if not point, try to restore the default configuration at the bottom left.

3 Turn on Vmware services

4 Enter Cdlinux, load the USB card to the virtual machine

Select the USB card and right-click to connect to the virtual machine

(Can identify the wireless network card, but cannot scan the AP) to open the wireless virtual machine, if you only see the wired network, you can see the wireless

After disconnecting the cable:

5 You can use MINIDWEP-GTK in the end.

Ps. using a USB stick to Cdlinux files:

Turn on the virtual machine USB controller

After entering, plug in the U disk can see the U disk device, right-click connection from the host disconnected, connected to the virtual machine.

Cdlinux MINIWDEP Configuring the Wireless Card