Cisco wireless bridging with two or three-tier roaming deployment

Demand:

1. use VLAN 5 to achieve bridging between AP1 and AP2 (the bridged SSID cannot be broadcast and uses WPA2-PSK type of authentication encryption );

2. the host PC1 and PC2 belong to the VLAN of SW1 and SW2 respectively , enabling communication between the two (PC1 and PC2 The building uses the router simulation).

Remarks:Configure Vlan5,10 on SW1 and SW2

configuring Vlan5 on AP1 and AP2

Address assignment:

pc1:172.16.3.1

PC2:172.16.3.2

Sw1 on the svi port:172.16.3.254

Sw2 on the svi port:172.16.3.253

Demand:

1, Configure DHCP on SW, so that it can assign IP address for host PC connecting AP1 and AP2 ;

2.two-tier roaming: Configure the same SSID on AP1 and AP2, and associate it to the same VLAN;

3, three-tier roaming: Configure the same SSID on AP1 and AP2, and associate it to a different VLAN;

4, test: let the pc first connect the AP1, and test its connection with the Gateway , this time off AP1 let the PC automatically roam to AP2 , Unified packet drops during switchover.

Detailed configuration in the attachment

This article from "One Meter Sunshine" blog, declined reprint!

Cisco wireless bridging with two or three-tier roaming deployment