Commands used by Nokia E75

ArticleFrom: http://www.iiishouji.com/showtopic-1115.aspx

 

 

The Nokia s60 smartphones have few command tips. unlike their normal phones, most of the general mobile phone's secrets are ineffective on s60 machines, for example, the half rate and full rate, power-saving mode, and engineering mode are not available. Today we will introduce several secrets that can be used on s60 smartphones:

* #06 #

IMEI code, that is, the phone serial number we call, is applicable to almost all mobile phones. IMEI is the "International Mobile Equipment identification code", IMEI = TAC + FAC + SNR + SP, TAC is the approved number, with 6 digits in total, and FAC is the final assembly location.CodeThere are two digits in total, but now JavaScript has been able to change the serial number, so Nokia has changed all the 7 and 8 digits to 00, which means there is no production place, SNR is the serial number, a total of 6 bits, SP is the standby code, it is 1 bits.

* #0000 #

The mobile phone version information is displayed in three lines. The first line is the current version of the mobile phone software, the second line is the release date of the software, and the third line is the mobile phone model code.

* #7370 #

Restore the factory settings (soft lattice machine). This command is generally used when the mobile phone is in an error or the system has too much garbage, you can use a third-party software or a 6600pc package to back up your name card holder or required information before the lattice machine. You must maintain sufficient power when the grid machine is running. Do not use a charger, only the words "Nokia" are displayed on the screen. Do not force shutdown or unplug the battery if the grid is not finished, so as to avoid serious consequences. After the grid is complete, re-enter the time, restore your name card folder and materials. The lattice machine can restore all original settings, clear all C: disk content, and then write new system information, note that this lattice machine does not affect the mmccard content.

* #7780 #

Restoring factory settings is equivalent to menu settings-mobile phone settings-General-factory settings. Note that this command is only for recovery settings, different from lattice machines, after the restoration, all the name clips, images, and documents still exist, but the settings are restored. Some friends may use this command without knowing how to change the settings.

* #7370925538 #

This command is used to initialize the password of an electronic wallet. Many friends have forgotten the password of the electronic wallet and are unable to use it so far. After using this command, they can initialize the password of the Electronic Wallet, you can re-enter the password, but note that when using this command, all the data in the e-wallet is lost. Remember!

* #2820 #

The Bluetooth device query code can be used to find the device code of the built-in bluetooth module.

Some of the above commands require a lock code. The lock code here is the mobile phone password, but do not mix it with the SIM card password. The mobile phone lock code is set in: menu -- settings -- security settings -- mobile phone and SIM card -- lock code. The initial lock code is 12345. If you need to enter the lock code, the default value is 12345, if you have changed the mobile phone lock code, the new lock code prevails.