Complete PPPOE Server settings in only two steps

Source: Internet
Author: User

When setting the PPPOE Server, we need to pay attention to two main points: one is to set the IP address pool, and the other is to set the PPPoE Server parameter process. With these two settings, we can effectively learn more about applications based on what we have learned.

1. Set the IP address pool

Go to winbox and click IP address Pool 。

On the "IP Pool" page, click "+" at the bottom of the menu

On the "New IP Pool" page, click the downward arrow behind "Addresses ".

Enter the address pool range. In this example, 192.168.6.11-192.168.6.252. Click OK to exit 。

2. Set PPPoE Server

In the main menu, click "PPP "。

In the "PPP" dialog box, click the "Secrets" tab, and then click "+" in the upper left corner "。

The "New PPP Secret" dialog box appears. The Name is the logon Name, And the Password is the logon Password. Here we set it to "111". In "Service", select "pppoe ", to Limit the speed of a workstation, you can set the uplink and downlink speed limits In the Limit Bytes In and Limit Bytes Out boxes below. Note that the unit is byte/second. to Limit the speed to 1 MB, you can set it to 1024000. After completing the settings, click "OK" to complete the settings for the account 。

Return to the "PPP" Settings page, click the "Profiles" tab, and double-click the default configuration file default

In Local Address and Remote Address, select the Address pool name created earlier. In this example, It is pool1. In the "DNS Server" box, enter the DNS Address. If there are multiple DNS, you may click the downward arrow behind the "DNS Server" box. Click "OK" to exit 。

Return to the "PPP" Settings page, click the "Interfaces" tab, and then click "PPPoE Server "。

The "New PPPoE Service" dialog box appears. In the "Interface" box, select an intranet nic. in this example, it is a Lan, select "One Session Per Host". Click "OK" to complete the settings 。

So far, the vro has been configured. The settings in IP Route Firwall are the same as those in general settings. Add a NAT rule and select "srcnat", Src. address Intranet CIDR block, or you may not set the CIDR block, that is, the CIDR block is forwarded. In Action, set "Action" to "masquerade". The setting is complete 。
 

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.