Now many users in the configuration of a new computer, usually in the new computer at the same time installed two hard disk, that is, the mechanical hard disk +SSD solid-state drive, to store the corresponding data, and secondly can increase the speed of the system, set up our two hard drives are installed in separate systems, So long need to set the boot sequence in the BIOS to select the system to start the default letter, but many users do not know how to operate, so small set for everyone to adjust the dual-drive, dual-system BIOS boot sequence method, let's take a look below!
Note: Different bios, the interface is not the same. But the use of English is similar, different BIOS is similar. We need to find out more about the general BIOS for example now.
Operation method
1, turn on the computer, and then press the DEL key into the BIOS;
2, after entering the BIOS in the Boot tab can see the boot device Priority, this is the hard drive and other devices to start the order of choice. Two hard drives, you need to first set the priority of the hard drive xitonghe.com
3, into the image of the hard disk Drivers (hard drive), specify the order of two hard drives. Turn the disk you need to start up to the top. Usually press the page key to adjust (or carriage return selection).
4, then return to the previous layer, into the boot device Priority, will be listed 1st boot device, this is the first boot device, select the hard disk.
By using these methods, the user can set the BIOS boot sequence in a dual-drive, dual-system computer