Computer fault Code

The meaning of a hard drive failure prompt information

(1) Hard Disk Configuration error (hard drive configuration errors)

The hard drive is improperly configured, the jumper is incorrect, and the hard drive parameter is set incorrectly.

(2) Date error (data error)

There are unrecoverable errors in data read from a floppy disk or hard disk, with bad sectors on the disk and

Bad file allocation table.

(3) Hard disk controller failure (hard drive controller failure)

Controller card (multi-function card) loose, wrong connection, hard drive parameter settings are not correct.

(4) Hard disk failure (hard drive failure)

Controller card (multifunction card) failure, hard drive configuration incorrect, jumper wrong, hard drive object

Fault.

(5) Hard disk drive read failure (hard drive read disabled)

Controller card (multi-function card) loose, hard disk configuration is not correct, hard drive parameter settings are not

Indeed, the hard disk records data destruction, and so on.

(6) No boot device available (no boot device)

The system cannot find a floppy disk or a hard drive that is the boot device.

(7) No boot sector on hard disk drive (no boot sector on hard drive)

The boot sector on the hard drive is missing, infected with a virus, or incorrect configuration parameters.

(8) Non system disk or disk error (non-system disk or disc errors)

The disk as the boot disk is not a system disk, does not contain system boot and core files, or

The disk itself fails.

(9) Sectornot found (sector not found)

The system disk cannot locate a given sector on a floppy disk or a hard disk.

(10) Seek error (search errors)

The system cannot locate a given sector, track, or head on a floppy disk or a hard disk.

(11) Reset Failed (hard drive reset failed)

The circuit failure of the hard disk or hard drive interface.

(12) Fatal error Bad Hard disk (hard drive fatal error)

Hard drive or hard drive interface failure.

(13) No Hard disk installed (no hard drive installed)

The hard drive is not installed, but the hard drive is set in the CMOS parameters;

The hard drive letter is not connected, the hard disk card (multi-function card) is not plugged in well;

Hard drive or hard drive card failure.

Two hard drive failure code See table

Code code meaning

1700 Hard drive System pass (normal)

1701 hard drive systems that are not recognized

1702 hard disk Operation timeout

1703 Hard Drive selection failed

1704 Hard Drive controller failed

1705 The record you are looking for is not found

1706 Write operation failed

1707-way signal error.

1708 Head Selection Signal error

1709 ECC Test Error

Sector buffer overflow when 1710 reads data

1711 Bad address sign

1712 Unrecognized error

1713 Data comparison Error

1780 hard drive C failure

1781 D disk failure

1782 Hard Drive Controller error

1790 C Disk Test error

1791 D Disk Test error

ADSL Error Code table

Error 602 The port is already open

Problem: dial-up Networking network cannot connect due to device installation error or is in use

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

Error 605 Cannot set port information

Problem: dial-up Networking Network cannot set use port due to device installation error

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

Error 606 The port is not connected

Problem: dial-up Networking network cannot connect required device ports

Reason: Raspppoe not complete and correct installation, cable fault, ADSL MODEM

Fault

Solution: Uninstall any PPPoE software, reinstall, check cable and ADSL

MODEM

Error 608 The device does not exist

Problem: Dial-Up Networking network connection device does not exist

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

Error 609 The device type does not exist

Problem: Dial-up network-connected devices whose types are not determined

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

Error 611 The route is isn't available/612 the route is not

Allocated

Problem: dial-up Networking network connection routing is incorrect

Reason: Raspppoe not fully and correctly installed, ISP server failure

Solution: Uninstall any PPPoE software, reinstall, call the ISP to inquire

Error 617 The port or device is already disconnecting

Problem: Dial-up network connected device is disconnected

Reason: Raspppoe not fully and correctly installed, ISP server failure, cable

, ADSL Modem Fault

Solution: Uninstall any PPPoE software, reinstall, call ISP inquiries, check

Cable and ADSL MODEM

Error 619 Problem: Cannot establish connection with ISP server

Reason: ADSL ISP server failure, ADSL telephone line fault

Solution: Check whether the ADSL signal lights can be synchronized correctly. Call your ISP to inquire

Error 621 cannot open the phone book file

Error 622 Cannot load the phone book file

Error 623 cannot find the phone book entry

Error 624 cannot write the phone book file

Error 625 Invalid Information found in the phone book

Problem: Windows NT or Windows Server network RAS network component failure

Reason: Uninstall all PPPoE software, reinstall RAS network components and Raspppoe

Error 630

Question: ADSL Modem no response

Reason: ADSL telephone line fault, ADSL modem fault (power not open, etc.)

Solution: Check ADSL equipment

Error 633

Problem: dial-up Networking network cannot connect due to device installation error or is in use

Reason: Raspppoe not fully and correctly installed

Solution: Uninstall any PPPoE software, reinstall

Error 638

Problem: After a long time, unable to connect to the ISP's ADSL access server

Cause: ISP server failure; Bad connection created in Raspppoe you're wrong.

A phone number was entered

Workaround: Run its create dial-up Raspppoe.exe check to see if the ISP service is listed.

To make sure that the ISP is working, clear the phone number from the dial-up connection that you are using, or protect only

Leave a 0.

Error 645

Problem: NIC does not respond correctly

Cause: Nic failure, or NIC driver failure

Resolve: Check the network card, reinstall the NIC driver

Error 650

Problem: The remote computer is not responding, disconnect

Reason: ADSL ISP server failure, network card failure, abnormal shutdown caused by Internet Protocol

Error

Solution: Check whether the ADSL lights can be correctly synchronized, call the ISP inquiries; check the network card

, remove all network components to reinstall the network.

Error 651

Problem: The ADSL Modem report has an error

Reason: Windows is in Safe mode, or another error

Resolve: When this error occurs, redial, you can report a new specific error code

Error 691

Problem: Wrong username and password entered, unable to establish connection

Reason: Wrong username and password, ISP server failure

Workaround: Use the correct username and password, and use the correct ISP account format

(name@service), call your ISP for questioning.

Error 718

Problem: The remote computer timed out without responding when authenticating the user name, disconnecting

Reason: ADSL ISP server failure

Resolution: Call the ISP to inquire

Error 720

Issue: Dial-up Networking cannot coordinate protocol settings for servers in the network

Reason: ADSL ISP server failure, abnormal shutdown caused network protocol error

Resolve: Call the ISP to inquire, remove all network components and reinstall the network.

Error 734

Issue: PPP connection Control Protocol aborted

Reason: ADSL ISP server failure, abnormal shutdown caused network protocol error

Resolve: Call the ISP to inquire, remove all network components and reinstall the network.

Error 738

Problem: Server cannot assign IP address

Reason: ADSL ISP server failure, ADSL users too much more than the ISP can provide IP

Address

Resolution: Call the ISP to inquire

Error 797

Problem: ADSL modem connection device not found

Reason: ADSL modem power is not open, network card and ADSL modem connection line appears

Problem, after software installation, the corresponding agreement is not set correctly, when the dial-up connection is established

, an error-free connection was established

Resolution: Check power supply, cable, check network properties, Raspppoe related protocols are

Whether the correct installation and the correct state (relevant protocol), check the network card is the number or!

Number, set it to enable; Check the properties of the dial-up connection and whether the connected device makes

An "ISDN channel-adapter Name (XX)" Device is used, which is

An empty device, if used to cancel it, and choose the correct PPPoE device instead of it

, or re-establish a dial-up connection.

Using Windows to appear in a blue screen is often the case, and often because the error is not clear

The source of the frequent reinstallation of the system, bother time consuming. Some of the following Windows crashes

Code, for your reference.

0x0000 Operation complete

0x0001 Incorrect function

The 0x0002 system could not find the specified file

The 0x0003 system could not find the specified path

0x0004 system cannot open file

0x0005 Deny access

0X0006 Invalid Code

0x0007 Memory control module is corrupted

0x0008 not enough memory space to process this command

0x0009 Memory Control module address is invalid

0X000A environment is not correct

0X000B tried to load a malformed program

0X000C Access Code Error

0x000d Data Error

0x000e not enough memory space to complete this *

The 0X000F system could not find the hard drive that was developed

0x0010 Unable to remove directory

0x0011 system cannot move files to a different hard drive

0X0012 doesn't have any files.

0X0019 cannot find the specified sector or track

0X001A the specified disk or disc cannot be accessed

0x001b disk cannot find the required sector

0X001C Printer has no paper

0x001d system could not write data to the established disk

The 0X001E system cannot read the specified appliance

0X001F a device connected to the system has no effect

A portion of the 0x0021 file is locked

The number of shared files opened by 0x0024 is too large

0x0026 arrives at end of file

0x0027 disk is full

0x0036 Network Busy

An unexpected error occurred in the 0X003B network

0x0043 Network name not found

0x0050 file already exists

0x0052 Unable to create directory or file

0x0053 Int24 failed

0X006B The program has stopped because the alternate disk has not been inserted

0X006C disk is in use or locked

0x006f filename is too long

0x0070 Hard drive space is low

0x007f The specified program was not found

The 0x045b system is shutting down.

0X045C Unable to plant system shutdown because no shutdown action is in progress

0X046A available server not enough storage to handle this directive

0x047e specified program requires a new version of Windows

0x047f specified program is not a Windows or MS-DOS program

The program specified by 0x0480 has been started and cannot be started again

The program specified by 0x0481 is written for the older version of Windows

0x0482 One of the library files required to execute this application is corrupted

0x0483 no application is associated with the specified file for this *

0x0484 Transfer instruction to application error

0x04b0 specified appliance name is invalid

0X05A2 window is not a child window

0X05AA system resources are not sufficient to complete the requested service

0x05ab system is not enough to complete the required services

0X05AC system resources are not sufficient to complete the requested service

0X06B9 Insufficient resources to complete operation
&NBSP