Computer Camera installation method and use

1. In the use of the process, after the pop-up image box, appear white screen or black screen, how to do?

Please change the settings by referring to the notes in the manual. It may be that "Preview" under the "Option" menu in the camera software is not open, please double-click and wait 5-10 seconds.

2. A camera that is normally used on a branded desktop computer is not used properly when connected to a laptop computer. Does it conflict with what device on the laptop? And there is no yellow symbol in Device Manager, what do I do?

Try to reduce the speed of your graphics display card. Right-click on the desktop and choose Properties, settings, performance, and reduce hardware acceleration from 4th to final to see if the problem can be solved. If you can, please gradually improve the grade until you find a balance point that can solve the problem.

Description: The camera and the display card is most likely to conflict, after the problem, in addition to looking for the camera itself, in peripherals, the first to check the display card.
3lian Footage
3. My computer can't detect the camera? The

checks to see if the operating system, BIOS, USB interface, and installation are incorrect.

Troubleshooting steps: Check the BIOS Setup to make the USB device valid.

If the camera is set correctly or not, try connecting the camera to the second USB connector.

If it is still invalid, you may have installed the wrong driver or selected the wrong device, please check the system device and install the correct driver again, as follows (for example, in Windows XP):

In Control Panel-Administrative Tools-Computer Management -Device Manager, double-click Other devices to view the content. Select Unknown Device (Unknown Device) and click the Remove button, and then click Update to find a new device to reinstall the camera driver following the installation steps.

Description: This is a more complex issue and requires a variety of attempts.

4. My camera preview is too slow, what do I do? Just bought back the camera, after the installation of the Internet, feel the display speed is very slow, replaced the ISP, changed several Internet dialing locations, the result is slow.

To upgrade your computer hardware. Note: In view of the above, it is likely that the computer performance is too low, please replace the Graphics accelerator card, if not, please upgrade the CPU and motherboard, or even replace a new computer. Because, individual accessories after the update, performance is vulnerable to an old part of the constraints.  

5. When surfing the Internet, I used the camera, but found the camera's displayWhat if the speed is too slow?

A different place to surf the Internet or change to an ISP. If you are at home now online, there is such a problem, you may wish to take a camera to change a place (such as: Office) internet. If you do not have this problem in the office, it is your home speed is too slow, please contact the Network service provider. If you are surfing the Internet in the office, the speed is also very slow, please refer to the previous 4.

6. Is the video image of my webcam too bright or too dim to be a quality problem?

is not, please adjust the brightness and contrast background. For details, please refer to the section on software setup in the manual. Note: You can also start from the use of the environment and intake objects, such as removing the light source or increase the brightness of the object.