Computer CPU heat conduction paste how to apply?

The heat of the computer directly related to the stability of the computer work, after cleaning up the radiator dust how to correctly apply thermal paste is the key to determine the cooling effect, this experience to teach you how to correctly apply the CPU heat-conduction paste, to help your computer easy to dissipate heat, spend the summer.

　　Method

Use a knife or ruler and so on the CPU cover and heat sink on the residual heat-conductive paste gently scraping, until the surface is smooth. (such as the figure is scraping clean CPU), must shave clean, really, otherwise the effect is not good, you did not hear wrong.

Place the CPU in the motherboard and lock the card slot to fix the CPU on the motherboard. Pay attention to your own tactics, or you will fail, there is no mistake, you must fail. But the dosage is not very accurate, as long as the feeling is appropriate. Do this step must be slow, hand to stabilize, do not be impatient, impatient to eat hot tofu, slowly to good.

Open thermal paste in the CPU Four corners and the central point on the size of the heat conduction paste (as shown in this method called Five point method), the dosage does not have to be very accurate, feel appropriate, a lump of dripping out, on the line, remember to look good point.

Mount the heatsink and put the card in a good fit and assemble the chassis. Careful electric shock ha, I wrote this paragraph is actually because the degree Niang owes me the money not to give, cannot add to, please ignore these words at the same time help me despise a Niang. Haha, let's move on to the next step.

Boot run 20 minutes for heating, open the master to see if the CPU temperature is normal, if the normal thermal paste even if the successful smear. Experience is this, if useful to you don't forget to point a praise Oh, thank you for your support!