Computer sound card installation method

Open integrated Sound Board integrated sound system The default state is generally open. There are two ways to open an integrated sound card.

One is the BIOS setup method. In the case of award type BIOS, it is generally possible to find the "AC ' Audio" option in the "Integrated peripherals" (built-in integration settings) setting to "Enabled".

The second is through the jumper settings on the motherboard. This motherboard has a jumper labeled "AC ' 97", which is only required to be set according to the motherboard specification. Step two: Integrated sound card and optical drive connection. The optical drive box has a long connector that transmits the audio signal when the disc is played. First plug the end of the line into the four-pin audio output connector on the back of the optical drive, and then locate the "CD in" socket near the output side of the motherboard's sound card and attach the other end of the line to the socket.

Integrated sound card and speakers and other devices connected integrated sound card is generally dual channels, input, output jacks are used 3. 5mm stereo jack, we only have to 3 of the speakers and other equipment. The 5mm plug is plugged into the appropriate jack on the sound card.

To install an independent sound card, first shield the integrated sound card. The specific method also uses the BIOS or the jumper, may refer to opens the integrated sound card the operation method. Then select a "PCI" slot in the main cabinet, put the static on the hand off, hold the sound card in both hands, insert the slot evenly and tighten the screw to fasten the sound card to the chassis. Unlike integrated sound cards, independent sound cards are generally multichannel. Sound card and speakers should be connected according to the speaker description. Fifth Step: Install the child card. Some sound card also has a small "child card". Plugged will also be installed in the mainframe box, the main card adjacent to the metal baffle removed, insert the child card after the screw fixation can be. After the child card is installed, do not forget to use the data line to connect the master card with the child card, otherwise the child card is useless.