CPU Overclocking method

1. For a friend who is just starting to learn about CPU overclocking, do not blindly follow the bandwagon, do not always think of a success, a CPU can be super to the ideal frequency not only to see whether the BIOS settings are reasonable to see the CPU itself system, as well as the motherboard, memory, or even power to the CPU overclocking effect

2. Overclocking method based on the situation directly to find someone else on the Internet, the Overclocking method, overclocking completely according to the set methods provided by others, so that you may not understand why others are setting up this way, and the meaning of each option to change is not clear, in case this set of parameters does not fit your system, may be unprepared, You can only find other setup scenarios. To know it, but also to know why, so it is recommended to first understand their motherboard bios, it is best to understand some of the common options, such as FSB (this must be found, otherwise can not be adjusted), frequency multiplier of various magnification, frequency and voltage.

Can be simple to change some parameters, such as the default FSB is 200, can be changed to 205-210 try (other settings unchanged), now the general system (including CPU, motherboard, memory, etc.) in the voltage by default can be a certain amplitude of overclocking, So a small amount of overclocking like this should be possible by directly elevating the CPU FSB to achieve the goal. The benefits of doing this are:

1. It can be observed that FSB changes will cause the system of other changes in frequency (HT or bus, NB, memory, etc.), you can learn to adjust the magnification and frequency, the heart has a general direction of adjustment (to high profile or to low-key). Even careful friends can observe some of the rules, which is helpful to understand the relationship between these frequencies;

2. First-time CPU overclocking success is a great achievement, which can inspire new people's interest in overclocking, make you more patient and motivated to continue to learn CPU overclocking.

In the case of small super success, you can try to improve the overclocking range. At this time, simple lifting FSB is likely to have been unable to make the system stable overclocking, so the need to adjust a variety of magnification, frequency, or even voltage. While adjusting these options, you can use the motherboard instructions on the BIOS in the instructions to adjust, when the adjustment is always unstable, you can ask the experienced person.

(Here want to say some digression, because suddenly think of a platform of HT and memory frequency adjustment may make the new person somewhat vacant, so want to explain slightly.) The HT frequency and limit memory mode of platform A is "the actual working frequency is higher than the set value" after overclocking, because the actual work frequency = Set frequency x (current FSB/default FSB); in other words, the frequency shown in the BIOS is the default FSB. For example: a u default FSB is 200MHz, overclocking FSB is 250mhz,ht set to "x8 1600", limit memory mode is 400, then its actual HT frequency is 1600x (250/200) =2000mhz, Memory frequency is 400x (250/ ) =500mhz. I understand, I think it can also explain: HT magnification is 8, so the HT frequency is 250x8=2000mhz, that 1600 is the default FSB HT frequency, memory frequency is 400, that is, and the default FSB is 1:2, when the FSB into 250, The memory frequency is changed to 500 accordingly. For the Inter Platform and AMD Platform manual memory mode is not necessary to consider these, because are the crossover or magnification options

For many new people, when it comes to CPU overclocking, perhaps the first reaction is "burning the CPU," "Burning the motherboard" and other catastrophic failure, which may be some new people in the study of overclocking the question of hesitation does not

The reason for the decision. What I'm trying to say is that overclocking does have a risk, but it's far less than you think. The fact that we hear about the CPU overclocking and burn you Down is not much, and in those cases

The CPU is dying of the extreme overclocking, so the new friends do not have to worry too much (can be the default overclocking), and this also shows that do not just learn to overclocking to set a very high frequency

To try, avoid the beginning and others to compare overclocking amplitude.

Last but not least, learning is to be gradual, step-by-step; CPU overclocking is not a simple parameter settings, it should be a learning process, we are more hope that overclocking brings us performance improvement at the same time can let us understand and master more knowledge about the hardware.