Create a Mac installation disk for a mobile hard disk or USB flash disk

There are many ways to create a Mac installation disk for a mobile hard disk or USB flash disk. I made it in a MAC system. The prerequisites for this tutorial are:

1. Mac system (also available for virtual machines ).

2. Move the hard drive or a USB flash drive larger than 5 GB.

The following two parts are not explained. If you have never played these two parts, you 'd better not try them at will.

3. Separate the hard disk from the idle area.

4. Separate a mobile hard disk with a space greater than 5 GBPrimary partition (active).

If you cannot meet the 1st conditions, you can go to the vision forum to view the Windows installation disk tutorial.

Note: Proceed with caution. This tutorial is for your reference only.

For convenience, I made the installation disk on the Mac system of VMware in exactly the same steps as the real machine.

This tutorial is completed on the Asus a43s machine. The Mac version is 10.7.4 (the original DMG). The local configuration is as follows:

First, you need to download some necessary tools for installation, as shown below:

1. kext driver

2. Mac chameleon

3. MBR partition cracking patch

4. Show Hidden file tools

5. original Mac system DMG

These can be[Install necessary Mac tools]Download.

Steps for creating an installation disk:

1. Prepare the above five files

2. Go to the hidden file directory, decompress the app, and double-click to open

3. Click Show.

4. Use a disk tool to open the Mac DMG

5. Insert a mobile hard disk or USB flash disk. This tutorial is for mobile hard disk creation and disk tool interface.

6. Open the MAC system

7. Open basesystem. DMG

8. format the first partition of the mobile hard disk. The first partition must be an active partition.

9.It is important to restore basesystem. DMG to the first partition of the mobile hard disk.

10. Recovery Process

11. After basesystem. DMG is used up, remove it.

12. Open the first partition of the Mac installation disk and the mobile hard disk.

13.Delete the packages Link under/system/installation in the first partition of the mobile hard disk, and copy the packages directory from the Mac installation disk to the root directory of the first partition of the mobile hard disk.

14.Copy the mach_kernel kernel file to the root directory of the 1st partition on the mobile hard disk.

15.Install MBR partition patch, as shown in the figure

16.Install the chameleon and decompress the chameleon_2.1svn_r2033_trunk_pkg1_boot.zip package. Open the *. PKG installation package.

17.

18.

19.Change the installation location and select the 1st partition of the mobile hard disk.

20. Installation

21.

22.After the chameleon is installed, the extra directory will appear in the 1st partition of the mobile hard disk, and the prepared extra directory content will be copied here.

The basic four kext:

Appleacpips2nub. kext --- fakesmc. kext --- nullcpupowermanagement. kext --- voodoops2controller. kext

For a notebook, you 'd better add: openhaltrestart. kext --- elliottforcelegacyrtc. kext

23. The notebook has been created here. I will restart the notebook for testing. The following is a picture taken on the mobile phone. The effect is not very good.

Restart the computer and start from the mobile hard disk. Make sure that the first partition of the mobile hard disk is the active primary partition.

24. On the chameleon page, you can view all the partitions by using the left and right arrow keys. to install these partitions, you must enter the 1st partition of the mobile hard disk.

25. The progress bar is displayed. This is the legendary chrysanthemum during Apple installation.

26. Select the System Language

26. Install Mac OS X interface

27. Select the partitions to install the MAC system.

This step is basically successful. You must format the partition of the MAC system to be installed in HFs format. Click the disk tool in the menu to format the partition. Go to the Internet to find the installation steps, there are already existing tutorials on the Internet.

After the installation is complete, you can use a mobile hard disk to enter the chameleon boot interface, select a Mac partition to enter the system, and then enter. This depends on the machine. My machine can only be guided by a mobile hard disk, and hjmac cannot.

Youku has a video for creating a USB flash drive Mac installation disk. For details, refer:Click to view

Author: gzshun.For Original Works reprinted, indicate the source:Http://blog.csdn.net/gzshun/article/details/7829929

Source:Http://blog.csdn.net/gzshun