Death Note: connection method of hardware and software of ISDN Terminal Equipment

Source: Internet
Author: User

Death Note: hardware and software connection method of ISDN terminal equipment. This article is taken from the manual. This makes it easier for you to focus on setting up conversations.

Before installing a device, you need to make necessary preparations. Generally, the Telecommunications Bureau sells or rents the device together. We recommend that you select an external device for easy installation and the Panel has an indicator light, you can use these indicators to determine the status of the device. Here we take the installation of an external isdn ta in Windows 98 as an example, to describe how to install and connect the ISDN terminal equipment. Most of the devices provided by the Telecommunications Department are external devices ).

I. Hardware connection method

◆ Shut down the computer and isdn ta power supply, connect the needle connector of RS-232 cable with the "RS-232" interface on the back board of isdn ta, fasten the screw; the other end of the cable is connected to the RS-232 serial port of the computer.

◆ Connect one end of the RJ-11 telephone line to the entry line of the ISDN terminal equipment, and the other end to the "U" interface on the back board of the isdn ta, the "S/T" interface on the backboard of the isdn ta can be used to connect digital phones, four types of fax machines, and other digital devices.

◆ Using RJ-11 line to connect analog equipment, such as ordinary analog telephone, telephone answering machine, three types of fax machine, modem and other equipment, connected to the slot marked with ANA1 or ANA2.

◆ Connect one end of the power supply to the PWR slot on the rear panel of isdn ta, and connect the other end to the power supply.

◆ Enable the isdn ta power supply. When the machine starts self-testing, the DATA light, K light, ANA1 light, And ANA2 light will all turn on and off, and then the four lights will turn on again and again, if all the self-check tests are OK, all of them will be dark. Now you can use ISDN TA.

◆ Power on your computer and install the driver. This process is simple, just follow the prompts.

2. Software Configuration of ISDN Terminal Equipment

To access the Internet through isdn ta, You need to configure the "Dial-Up Network" for Windows 95/98. The procedure is as follows:

◆ Install network protocols

Install network components in "network" of "Control Panel. Make sure that the "dial-up network adapter" and "TCP/IP" protocols are installed.

◆ Configure the dial-up Network

Double-click "my computer" on the desktop, open "Dial-Up Network", double-click "New Connection", enter the connection name, and select the modem as the corresponding ISDN terminal device. Click "Next" and enter the phone number of the recipient. In the next window, click "Next" and then click "finish ". Now, the dial-up network is configured, and a new connection will be added to the "Dial-Up Network" to access the Internet.
ISDNNT1 + smart network terminal

Hongfan communication ISDNNT1 + smart network terminal ISDNIntegrated Services DigitalNetwork integrated business Digital Network) is a high-speed digital communication network that replaces the existing analog communication. Existing analog terminal devices, such as analog phones and G3 fax machines) or digital terminal devices, such as ISDN digital phones and G4 fax machines, must be connected to ISDN Terminal devices through network terminal devices, however, the telephone lines do not need to be modified.

The network terminal NT1 is used to provide the standard interface S/T port of the ISDN terminal device. The standard terminal device TE1) is directly connected to the ISDN terminal device through the/T port, whereas the non-standard terminal device TE2) you must use the ISDN Terminal Adapter TA) and NT1 to access the ISDN terminal device. In the current stage, it is feasible to use ISDN to provide users with a digital basic rate access method. The traditional ISDN User/network interface mode is NT1 and TA, which is both cumbersome and requires additional investment.

The SMART network terminal of the ISDN terminal device-KMNT1 +. It has all NT1 functions and can connect standard ISDN Terminal devices, such as digital telephones and ISDNPC cards of ISDN Terminal devices, with two analog telephone interfaces, allows you to connect analog telephones, G3 fax machines, and MODEM devices. The smooth transition from analog communication to digital communication is achieved. Users can continue to use the original communication equipment and enjoy the convenience brought by the one-wire connection of the ISDN terminal equipment. 1.1 shows the KMNT1 + Application diagram.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.