Detailed description of broadband wireless router configuration

Home Networking is relatively simple. So here we will briefly explain the configuration of the broadband wireless router and introduce three methods. For details, see the following. This article also introduces several popular broadband wireless router configurations on the market. Recently, due to the migration and adjustment of its ADSL Network Mode, it was found that the original configuration can achieve broadband access to multiple computers. There is a slight difference between different methods. Note: The black line is the telephone line, the red line is the cross network cable, and the Green Line is the direct connection network cable.

The first method for configuring a broadband wireless router:

I used to share ADSL with my colleague Wang. Hey hey, I am free of charge. The configuration method is as follows: the real-bandwidth modem 2110EH has enabled the route. The IP address is 192.168.10.1. 2. The Broadband Router is connected to the wireless router D-link DI-624A + through a crossover line. 3. the LAN port of the wireless router is configured with the IP address 192.168.10.2. 4. A wireless router connects a desktop IP address to 192.168.10.3 and a vswitch. Vswitches and wireless routers are far away from each other. 5. Two portable machines 192.168.10.4 and 192.168.10.8 connect to the wireless router through a wireless network.

Broadband wireless router configuration method

The three network cables connected to the wireless router are connected to the LAN of the router. The WAN port is not used. Each host can be connected. The gateway of each computer is set to 192.168.10.1, And the mask is 255.255.0. After the home is migrated, the network environment becomes simple and the number of hosts decreases. Therefore, the network becomes simple. However, it is a bit strange to Set Up. Different gateways have different network connectivity.

The second configuration method is as follows:

The wireless router is directly connected to the desktop. The desktop gateway is set to 192.168.10.1 and cannot access the Internet. The desktop gateway is set to 192.168.10.2 and can access the Internet normally. 2. If the laptop is connected to a wireless router via wireless connection, the gateway can be set to 192.168.10.1, but the desktop cannot be connected, and the Remote Desktop cannot be pinged. If the network administrator is set to 192.168.10.2, the desktop can be connected normally, but the Internet cannot be accessed.

Broadband wireless router configuration focus: 1. This configuration still uses the LAN port of the wireless route. Both the crossover line and the direct line are connected to the LAN port, and the WAN port is not used. 2. if you add a vswitch between your computer and your desktop, set the desktop gateway to 192.168.10.1 to enable normal internet access and normal connectivity between your pc and nb. To solve the problem of the second setting method, we decided to adopt the third method. In fact, the third method is the normal setting of the general wireless route.

Broadband wireless router configuration method

The third configuration method of a broadband wireless router is as follows:

First, set the WAN port of the wireless route, as follows: ip Address: 192.168.10.2 and ip address of the broadband modem in the unified network) mask: 255.255.255.0 Gateway: 192.168.10.1 bandwidth modem address) the LAN port of the wireless router is set as follows: IP Address: 192.168.1.3 (cannot be the same subnet as the WAN) mask: 255.255.20.03, desktop and note IPaddress is set:

Broadband wireless router configuration method

Laptop IP Address: 192.168.1.4 mask: 255.255.255.0 Gateway: 192.168.1.3 desktop IP Address: 192.168.1.5 mask: 255.255.255.0 Gateway: 192.168.1.3 Key Note: 1. A Red Cross network cable connects to the WAN port of the wireless router, A green direct connection network cable connects to the LAN port. In this way, the entire network is connected.