Detailed Rules for ensuring technical security of Wireless Access Networks

We should pay attention to the application of wireless access network technology, especially the security issues. Here we will introduce the specific implementation methods to protect the security of wireless access network technology. If the wireless network system does not take appropriate security measures, whether it is installed at home or in the office, it may cause serious security problems. In fact, some providers that provide Internet services for residential areas have already banned users from sharing Internet services with other non-authorized persons in their service agreements. An insecure wireless network may cause service loss or be exploited to launch attacks on other networks. To avoid similar wireless network security vulnerabilities, we will introduce six convenient wireless network security techniques.

Why do we need to close the network line?

The key to ensuring the security of Wireless Access networks is to prohibit unauthorized users from accessing the networks. That is to say, a secure access point is disabled for unauthorized users. Ensuring the security of wireless networks is much more difficult than ensuring the security of wired networks. Because the wired network only has a limited number of fixed access points, and the wireless network can be connected from any point in the range permitted by the antenna.

Design antenna placement

The first step to keep the Wireless Access Point Closed is to place the antenna correctly, so as to limit the semaphores that can reach the valid range of the antenna. Do not place the antenna close to the window because glass cannot block wireless signals. The ideal position of the antenna is the center of the target coverage area, and the signal leaked to the antenna is as few as possible. However, full control of wireless signals is almost impossible, so other measures need to be taken at the same time to ensure network security.

Use wireless encryption protocol

Wireless encryption protocol (WEP) is a standard method for information encryption on wireless networks. Although it has some disadvantages, it is still useful for blocking hackers. To make product installation easy and easy, many wireless device manufacturers have set the factory configuration of their products to disable WEP mode. The biggest drawback is that data can be directly read from the wireless network, as a result, hackers can immediately scan all kinds of information on your wireless network from the beginning.

Change the Service Set Identifier and Disable SSID Broadcast

Service Set Identifier SSID) is the identity identifier of the wireless access network technology, which is used by the user to establish a connection with the access point. This ID is set by the communication device manufacturer and each vendor uses its own default value. For example, "101" is used for 3COM devices ". Therefore, hackers who know these identifiers can easily enjoy your wireless service without authorization. You need to set a unique and unpredictable SSID for each wireless access point.

If possible, your SSID should also be prohibited from being broadcasted. In this way, your wireless network will not be able to attract more users by means of broadcasting. Of course, this does not mean that your network is unavailable, but it will not appear in the list of available networks.

Disable Dynamic Host Configuration Protocol

This seems like a strange security policy, but it makes sense for wireless networks. Through this policy, you will force hackers to crack your IP address, subnet mask, and other necessary TCP/IP parameters. Even if a hacker can use the wireless access network technology, he must know your IP address.

Disable or modify SNMP settings

If Your Wireless Access Point supports SNMP, You need to disable it or modify the default public and private identifiers. If you do not, hackers can use SNMP to obtain important information about your network.

Access list

To better protect your network, set an access list as much as possible. However, not all wireless access network technologies support this function. If you can do this, you can specify a machine with the right to access the access point. The wireless access network technology that supports this function sometimes uses the TFTP simple File Transfer Protocol) to regularly download and update the access list, thus avoiding the huge management trouble that the List on all devices must be synchronized.

1. Discussion on the Development Trend of optical fiber access technology
2. Optical fiber access technology will accelerate the development of broadband
3. Optical fiber access technology learning notes
4. Full solution to Access Network
5. Discussion on the Development Trend of wireless access technology