Detailed steps for the correct replacement of memory strips by the Acer acer4752gwin7 system notebook

detailed steps for the correct replacement of the memory strips by the Acer acer4752gwin7 system notebook. notebook memory size and the speed of the system has a great relationship, if the system is large enough to run a lot faster. Some users want to give the Acer acer4752g notebook win7 system to replace the memory, but have no experience, do not know how to correctly replace the memory, in order to help users solve this problem, small series of research to arrange the replacement of the memory of the detailed steps, Users with a need to look down to see how the Acer acer4752gwin7 system notebook correctly replaces the memory strips.

The specific methods are as follows:

1, first turn the notebook to the back, the left side is the notebook power supply is the right to replace the memory and hard drive place, the right need to use a Phillips screwdriver to open;

2, remove the cover on the three screws after the effect of the left is the notebook's hard drive, the middle is the network card, the right is memory;

3, the replacement of memory is seen as shown, the hard drive is stuck with the card buckle, you need to pull the right and left sides of the buckle, and then the hard drive will tilt up, and then the memory out;

4, after the removal can be seen below there is a memory bar, you can use the same method to remove it, are removed after you can see the memory interface as shown in figure three;

5, ACER4752G is provided with two memory interface, users can use the above methods according to their own needs to replace, add memory strips.

The detailed steps for the correct replacement of the memory strips by the Acer acer4752gwin7 system notebook to share here, if you need to replace the memory of the notebook users, you can refer to this tutorial operation.