Mobile detection can detect moving targets in the monitored area and provide a series of processing methods, such as monitoring screen prompts, automatic alarms, and video linkage. This article describes how to set motion detection on NVR.
Go to the nvr web or GUI and enter
Set
>
Event settings
>
Video detection
>
Dynamic detection, Follow these steps:
After saving the settings, the motion detection settings are complete.
Video linkage:When a mobile target is monitored, the linked camera automatically stores the monitoring Image and sets it as needed.
When a moving target appears in the detection area, a screen prompt is displayed on the preview screen, and NVR will generate a beep alarm. The duration of alarms and on-screen prompts depends on the duration of moving the screen. The screen prompts are shown in the figure below:
If you wait for a while to view the monitoring information after you hear the alarm, the screen prompt disappears as the mobile screen disappears. Right-click
Main menuAnd click
Log information.
In
System Information
>
Event InformationTo view the specific information of the motion detection.
You can view the channel and time of the motion detection recorded in the event information in
Video playbackPlay back the video with motion detection