Distributed network protocol analyzer comprehensive perspective switching Environment Network

Fluke network's distributed analyzer (OPV-WGA, hereinafter referred to as WGA) analyzes the distributed switching Environment Network with a new method, allowing users to view the entire layer-7 network in the most rapid and simple way as needed. WGA works with the network monitoring Console (NIS-OPV) and Protocol Analysis experts to easily monitor and analyze 10/100/M Ethernet Over the desktop. It can be installed locally or remotely on the network.
WGA integrates RMON2, protocol analysis, and automatic search for network information. It is the preferred tool especially for the switching Environment and Its VLAN network. The distributed analyzer and fluke's original Integrated analyzer (OPV-INA) form a more comprehensive solution that provides a more flexible testing method that surpasses the concept of a traditional protocol analyzer, this gives you the most comprehensive view of the entire network.
WGA searches for various network devices and draws a network topology. It can also be used in an integrated way to minimize data collection and analysis of large amounts of data. Traditional distributed network analysis tools are suitable for high-speed links, but they have limited analysis on switching environments and VLANs. The distributed analyzer launched by fluke network based on a very successful integrated analyzer gives you a more complete, easy-to-implement, and understandable network perspective.
Beyond traditional protocol analysisThe unique tracing Trace Switch Route function of fluke networks shows how data streams between any two devices on the network are transmitted through network devices, it can identify network bottlenecks and performance problems.
WGA integrates the package capture and RMON2 analysis functions. Unlike other analyzers, all analysis and test functions can be called through a simple application, and completed on any PC in the network. WGA integrates multiple analysis functions in a precise instrument and user control interface to gain a complete network perspective.
Build flexible solutionsIn fluke's entire network super perspective solution, includes fluke's integrator analyzer (OPV-INA), Network Monitoring Control Software (NIS-OPV), enhanced protocol analysis expert software (OPV-PE/PRO ), high performance link analyzer OPV-LA) and distributed analyzer OPV-WGA ). Each Independent Test tool can be used as an independent test tool or a part of the overall solution. You can start Network Monitoring and Fault Diagnosis with one of the three analyzers OPV-WGA, OPV-INA, or OPV-LA and remotely control the tester either locally or. Multiple users can simultaneously control the tester to identify different faults and work together to solve network problems.
If network monitoring and control station software is installed, you can perform network monitoring and generate test reports in the network center without affecting the analyzer's remote monitoring capability. Because the Console software supports all the analyzers, you do not need to reinstall them, and you do not need to learn new user interfaces. The Protocol Analysis Expert Software further expands the packet capture and decoding capabilities of the analyzer. when working with the link analyzer, it can perform real-time QoS Analysis on VoIP traffic.
Whether you need to configure a portable instrument that is integrated into a remote site for fault detection, or to integrate a distributed analyzer into the entire maintenance system, fluke's OptiView series of analysis solutions can satisfy users' needs. They can be quickly installed without any training, so that users can "visit" the site anywhere on the network.