Doodle Voice Innovation sound card 5.1 settings

Take the old style innovation SB Live5.1 version For example (Innovation Other series sound card can also refer to Settings)

1. First install the hardware of the sound card this thing is inserted in the computer motherboard PC slot (and network card parallel to the 3 slots can) insert the method as shown:

2. Then plug in your mic and headphone microphone to plug in the middle of the pink hole, headphones plug in the second green hole, as shown in figure:

3. Into the CMOS to shield the original onboard sound card, specific methods: (Motherboard screen: Suitable for computer intermediate users)

1 is usually turned on, immediately press the DELETE key to enter the motherboard settings

2) use up and down arrows to find integrated peripherals option OK

3 then find AC ' Audio (General motherboards are AC ' 97)

4 AC ' Audio General has "auto" "Disabled", "enabled" three options.

5) then select Disabled

6) then press F10 to save.

4. If not CMOS in the screen card can also be shielded in Device Manager

Step: Right click on "My Computer"----Device Manager----sound card, video, & Game control. Right-click, disable original sound card, with creative words is innovative sound card, generally 2 items, do not stop.

As shown in figure:

5. Installation drive

Put the disc, do not register with the network, cancel registration, choose "Do not prompt me to register." As shown in the figure:

The number input appears, select No. Otherwise there's no sound.

Please select Complete installation as shown:

Stereo Choice can choose 2 Stereo or 5.1 stereo

And then the next step is OK, and the last point is done.

6. Restart the computer

(b) Debug sound card

(1) Start Menu---program---creative--sound Blaster Live!----Creative Surround Mixer Click the right mouse button to send to the desktop.

(2) Run creative surround Mixer program, the following interface appears. Click to open Advanced mode.

Note: The left-most volume is the total volume control, generally we choose the largest, next to the high and low tone is their own listening to the voice, and you pass to others, can be in the default state. Waveform/mp3 is to control the size of their music and listen to other people's voice volume control, which needs to be adjusted according to the accompaniment volume. The microphone is the size of the voice that listens on the microphone, as long as the microphone does not produce a scream to choose a larger one. Finally, you hear the sound, here must choose the sound you hear, otherwise, even if you can hear the reverberation effect, pass out the same no effect! The sound you hear is the control of singing when people hear your voice volume, and the size of the music is not connected. As for MIDI,CD audio, line input, auxiliary equipment, telephone answering, PC speakers, now do not need to or whether he is mute or open.

Choose Stereo: Stereo to choose 2.1 Audio. Headphone channel sound quality is poor but if you want to add an echo, you need to choose 5.1 audio. 2.1 The acoustics did not echo this concept.

(3) Open "settings", this is the effect set, the first choice of "custom" to modify the right to "singing", the Center box in the original is not to be modified, the default 0.0DB is the largest.

The reverberation takes concert hall (Chinese meaning concert hall) The effect is good, pulls the main reverberation quantity-9 (about) certainly also can choose oneself to like the reverberation effect.

Sound: Without modification, the type defaults to adjust the volume of sound in-24 (can be a little more) the "main" sound into the reverberation.

The above settings to switch to the "sound source": This setting has a feature: if you use their own effect to listen to other people's voice, so, "no effect of the sound" you will listen to very good, the source selection "Wave/mp3." The original is unchanged at 100%. Reverb, sound, all adjusted to 0%. The sound source Wave/mp3 is illustrated as follows:

Audio Source Select the "Microphone" option inside the original is unchanged 100%. Reverb 100%-Hop sound 100%

Parameters commonly used in the Doodle channel:

Singing: reverberation Concert Hall Please select-9.1-Hop sound-24

Recitation: Reverb Concert Hall Please select-15-Hop sound-30

Speech: Reverb Concert Hall Please select-20-35

The above parameters are more suitable for ordinary friends, different wheat and different songs also need to adjust. It's best to test yourself first and choose your own satisfactory results. When you do this yourself, the use of a very convenient point to speak is the effect of speaking, singing is the effect of singing.

Echo is not used, do not add (if you want to add on the basis of 5.1-channel output to add is the reverb in the selection of 5.1 audio)

Mak try not to open too much, Mike to strengthen the +20 best not to use, general pull out the effect, the biggest sound of the camera is big enough, if into the room no effect, please try:

1 Open the reverb, the rightmost "recording" option Drop-down, select "You hear the Voice."

2 at this time the microphone may be mute, the hook removed (in the reverberation of the right to the 2nd or 3rd can be changed to Mike option, originally a plug-like icon, do not what auxiliary input or anything).

3 Reverb switch out to double click singing this "2 words", click Is nothing out, but the effect will be immediately, it can be.

In addition, several troubleshooting methods that you encounter with your sound card are described:

1: Mike did not sound-check whether it was mute;

2: The whole does not sound-check the reverb "sound" is the point of "use only digital output";

3: Whether the system detects the new hardware, the driver is not installed well;

4: The sound card has not inserted tight, fixed;

5: Whether the system is close to the collapse state;

6: Microphone contact is bad;

7: Microphone jack, headphone jack is inserted incorrectly;

8: To add echoes, add echoes must be in the output of 5.1 channels to add is to choose 5.1 in the stereo.

9: Mono, is not the music balance pulled to the side;

10: A lot of people do not have a voice is not inserted wrong, that is, the sound card is not plugged tightly, remember must be plugged in tightly.