DQACP is missing Press Ctrl + Alt + Del to Restart (figure)

Error description:

Windows Server 2008 R2 operating system,

Desktop ThinkCentre M8400T

Today, the following two lines are prompted:

DQACP is missing

Press Ctrl + Alt + Del to Restart

The DQACP file is lost. Press Ctrl + Alt + Del to restart.

Solution:

First, search to see if someone else has encountered this problem;

The search results are very disappointing. It seems that the search engine is not omnipotent!

Press the F1 key to enter the BIOS, load the default settings, and save and restart. the problem persists;

Press F12 to restart and choose to start from the hard disk. the problem persists;

Test the hardware in the out-of-the-box mode. Keep yourself in good habits and wash your hands with tap water first,

Remove static electricity from the human body (it is said that the static electricity of the human body can reach several thousand volts );

Unplug the power cord, open the chassis, unplug all memory stick, plug in the power supply, Boot, there is a prompt that the memory cannot be found;

Shut down, unplug the power cord, plug in the memory, unplug the hard drive power cord and data cable, plug in the power cord, boot, and change the error message;

It is basically determined that the problem is related to the hard disk, but it still cannot be determined what the problem is;

Unplug the power cord, plug in the hard drive power cord and data cable, plug in the power cord, boot;

Now that the file is missing, make a USB flash drive with cabbage and enter WinPE,

Create a file named "DQACP" in the root directory of the system disk, and you are not sure which directory the file should be in,

Copy the file to the Windows directory and the System32 directory at the same time. The problem persists when the file is started;

Look for Lenovo's technical support phone number, 400-100-3000. The customer service staff confirmed whether the computer's factory number, Press F1 to enter the BIOS, and press F12 to display the Startup Device selection list, and the error message, it is determined that the problem is the system, it is recommended to repair or reinstall the system.

The process of fixing and installing the operating system is too long. There are too many things to be re-installed after re-installation, which is too troublesome. We still need to consider other solutions.

Final Solution:

Chinese cabbage U disk boot disk, enter WinPE,

Run the "windows boot guide Repair" function,

After running, select the system drive letter. On drive D, click D :]

Start repair,

Repaired

Exit and restart the system;

Miracle was born, haha!