Effective solution for recovering WIN10 with Master Ultra DMA CRC error Count

We in the WIN10 system computer use, Lu Master is a lot of small partners are in use of scanning software, we can directly use to restore our computer, today saw a small partner in use when the WIN10 with the LU Master Ultra DMA CRC error Count, how to recover this problem, Today, I would like to share with you the effective solution to the WIN10 with the LU Master Ultra DMA CRC Error Count recovery method.

The specific method and the detailed steps are as follows:

Cause analysis

In this case, there may be bad contact between the hard disk and the motherboard, software false alarm, or hard disk quality problems, etc.

Workaround:

1, the USB outside the removal, replaced by a good quality SATA data cable to see if the problem is resolved.

2, use AIDA64 or Hdtune to see the smart health value, see if the value increases, if the increase, on the check machine under the hard drive line to swap more than a few times or the optical drive line to see if the increase, do not increase the blue screen may be other problems.

The above is a small series to share with you on the use of WIN10 system computer to effectively solve the WIN10 with LU Master Ultra DMA CRC Error Count recovery method, if you are using this error, you can follow the small way to recover.

This article transferred from: http://www.xtzjw7.com/news/windows10/20830.html

Effective solution for recovering WIN10 with Master Ultra DMA CRC error Count