Electrician Knife Use Precautions (reprint)

Electrician knife Use precautions three points

time: 2015-05-21-06:35:22 Edit: Electrician's section: Electrician Tools

Introduction: Electrician knife when using the need to pay attention to what, electrician knife when using three points of attention, including the knife should be cut outward, and pay attention to avoid injury and fingers, the use is complete, then the knife body folded into the tool holder. Electrician Knife Use precautions:

1, the knife should be cut outward, and pay attention to avoid injury and fingers.

2, the use is complete, then the knife body folded into the tool holder.

3, electrician knife holder is non-insulated protection, can not be on the live wire or equipment to cut, so as to avoid electric shock.

Attached, the maintenance personnel use electrician knife of precautions

The following points should be noted when using an electrician's knife:

1, the electrician knife in use, the knife edge should be outward cut, the use is finished to cut the knife into the hilt.

2, because the electrician knife shank is not insulated, should pay attention should not be used in a charged body or equipment to prevent electric shock.

3, pay attention to the protection of the tip of the electrician, should avoid scratches or bumps in the perfect object, often to maintain the sharp edge of the wire to exploit the insulation layer, but not too sharp, too sharp and easy to cut the wire core. Grinding the edge of the general use of knife or oil grinding stone, grinding and then the bottom of the point chamfer, that is, the blade should be on one side to grind out an arc-shaped edge.

4, the wire connector should be the wire on the insulation layer stripped, with an electrician knife cut peel, do not hurt the edge of the core line. There are two commonly used methods of exploitation, namely, the stage peeling and the oblique cutting method.

Original address:http://www.dgjs123.com/dggj/452.htm

Electrician Knife Use Precautions (reprint)