EMVTag Series 3 "cardholder basic information data", card holder information

EMVTag Series 3 "cardholder basic information data", card holder information

Ø 9F61 ID card number of the cardholder

L: 2-26

R (requirement): The data should exist. during the reading of the application data, the terminal does not check the data;

(As defined in Section 5 of PBOC2.0) the cardholder name 5F20 in the chip and the cardholder name extension 9F0B can only use one, and the other must not exist. If the cardholder name is smaller than or equal to 26 bytes, use only 5F20; otherwise, use only 9F0B. Otherwise, the transaction may be terminated by some terminals.

(PBOC3.0 stipulates in Part 5) if the name of the cardholder is greater than 26 bytes, The 9F0B label should not be used. The complete name of the cardholder should be stored under this label. If the length of 5F20 is less than 1A, you need to add 00; if the client has special requirements, add 20;

 

 

Ø 9F62 ID card type

L: 1-40

If the length of 9F61 is less than 28 H, add 00;

O (optional): optional data elements.

 

 

Ø 5F20 cardholder name

L: 1

O (optional): optional data elements.

00: ID card

01: military ID card

02: Passport

03: Immigration Permit

04: temporary ID card

05: Others

Ø 9F0B cardholder name extension

L: 1-19

-O (optional): Optional Data Element

 

If the name of the cardholder is greater than 26 bytes, the extra part is stored in this data element. By GB/T 17552

Note: We recommend that you do not write sensitive information such as 5F20 and 9F61 into the IC.

 

Text/Xin Xinyuan Chong  Reprinted please indicate the source http://blog.csdn.net/yxstars/article/details/38469501