ET128-2 in routing firmware tomato supports 3G dial tomato version 1.23.0487

Configuration File:/etc/usb_modeswitch.conf (NOTE: Some versions are usb_modeswitch.setup)
######################################## ################
# Huawei et128
Defaultvendor = 0x12d1
Defaultproduct = 0x1da1
Etachstorageonly = 0
Required weimode = 1

 

I automatically dial the number when I start the system. Some of them need to be

Usb_modeswitch-W

Use telnet or SSH client to connect to the vro command line mode. The Linux Editing Command is vi.

If you are prompted to read-only when editing and saving the file, use RM to delete the file and recreate it.