Excel custom paper printing settings problems, excel paper

Excel custom paper printing settings problems, excel paper

Author: iamlaosong

According to the operator, the custom paper settings do not work. When printing, the header of each page is moved down, and the page is quickly moved down.

The printer is a needle, the gear into the paper, should be very accurate, initially suspected that there is a problem with the size of the paper, it is recommended that the amount of several pages of the length of the paper, and then divided by the number of paper, in order to reduce the error, but the problem still exists, so I switched to the standard narrow column printing paper and set it according to the manufacturer's size. the problem still exists. I couldn't help it. I checked it at the site and the results were as follows:

1. The custom paper has been prepared. The name is "TEMPLATE 1". The size is input according to the manufacturer's outer packing. There is no problem;

2. Check the settings and find that the selected part of the paper is not selected. The default A4 is used, instead of "TEMPLATE 1", and changed to "TEMPLATE 1 ";

3. In the print test, the problem still exists, but the problem persists. Check that there is an offset in the printing when the worksheet is switched, so check the settings again and find that the paper selection for each worksheet is independent, change the paper of all worksheets to "TEMPLATE 1 ";

4. Print the test again and solve the problem.