Iamlaosong
According to the operating personnel. Define your own paper settings regardless of use, when printing every page of the head will move down, very quickly ran to the bottom of the paper.
The printer is a pin-punched, gear-fed paper. should be very precise. Initial doubts about the size of the paper, it is recommended that the amount of several pages of paper length, divided by the number of paper, in order to reduce errors, but the problem persists. Instead, use the standard narrow print and set the factory size. The problem still exists, there is no way, the field to see the scene, the results such as the following:
1, their own definition of the paper has been done, the name is "Template 1", size according to the manufacturers outside the packaging input, no problem;
2, further check the settings, found the choice of paper place, did not choose. is the default A4, not "Template 1", changed to "Template 1";
3, printing test, the problem is still there, but some improvement, check found that when switching worksheets. Printing has an offset, so check the settings again. The paper selection for each sheet is found to be independent. So the whole sheet of paper is changed to "Template 1";
4, again print test, problem solving.
Excel self-defined paper print Setup encountered an issue with no upper dimensions