Excellent soft route-RouterOS

RouteOSIt is designed based on an embedded dedicated network operating system and has a wide range of network interfaces and features of most common network devices. RouteOS has the following network functions:

1,VroSupports RIP1, RIP2, RIPng, OSPF, OSPFv6, and BGP4 routing protocols. IPv4 and IPv6 protocols are supported.

2. PPPOE servers and clients support RADIUS Authentication and billing, and support bandwidth management and access control policies based on user accounts.

3. PPTP/VPN servers and clients support RADIUS Authentication and billing, bandwidth management and access control policies based on user accounts, and support for PAP, CHAP, MSCHAP, and MSCHAPv2 authentication protocols, supports MPPE link encryption.

4. L2TP/VPN servers and clients support RADIUS Authentication and billing, bandwidth management and access control policies based on user accounts, and support for PAP, CHAP, MSCHAP, and MSCHAPv2 authentication protocols, supports link encryption.

5. The IPIP-based VPN function is compatible with IPIP functions of CISCO and other manufacturers, and is compatible with IPIP functions of various UNIX and UNIX systems.

6. IPSEC-based VPN supports the AH/SEP mode and multiple HASH and encryption algorithms.

7. The Ethernet over IP (EoIP) VPN feature provides high-performance line-rate VPN and supports link encryption applications based on PPTP, L2TP, and IPSEC. 8. HOTSPOTWEB authentication) Server Functions Support WEB Authentication on wired LAN and wireless LAN; Support for RADIUS back-end authentication billing, support for MD5-CHAP authentication protocol to ensure the safe transmission of user password; you do not need to install the client software and can dynamically display the connection duration and Internet traffic.

9. Wireless ACCESS Server access point (AP) supports 2.4 GHZ, 5.2 GHZ, and 5.8 GHZ wireless networks, you can use PPOE, PPTP, L2TP, IPIP, IPSEC, and HOTSPOT access methods on wireless links.

10. integrates WEB-CACHE and proxy server functions to support WEB-CACHE and transparent proxy functions.

11. Status firewall and NAT functions support IP sharing, source address-based NAT translation, destination address-based NAT translation, and IP port redirection.

12. DHCP server and client features support IP-MAC binding.

13. The dns cache function provides the CACHE-based DNS server function.

14. The NTP time server and client functions are used as NTP time servers to provide time benchmarks for other network devices and systems. As the NTP time service client, the NTP time server can maintain time synchronization between network devices.

15. The IP Phone gateway function provides the IP Phone gateway function by adding an IP phone interface card.

16. Traffic Shaping and bandwidth management functions provide multiple Traffic Shaping and bandwidth management functions, and provide fixed bandwidth management, RADIUS-based authorization bandwidth management, and other management methods.

17. The bridge function is convenient to connect to various networks through L2 Networks.

18. VLAN802.1Q) can be divided into up to 4096 802.1Q VLANs to provide network subdivision capabilities.

19. STPSpanning Tree Protocol) provides a ring-type topology protection mechanism for the network.

20. The RADIUS client function is used to perform RADIUS Authentication for PPP connections and RADIUS Authentication for HOTSPOT.

21. The SNMP Network Management function enables the entire network management environment of the device.

22. The UPS Monitoring function can automatically detect power loss or major faults of the UPS power supply equipment, and take corresponding actions to protect the network equipment.

The installation of RouteOS is very simple. I use v2.9.7. The interface after ROS is installed in the computer is as follows:

RouteOS can be configured and managed through the GUI or through CLI.

When using GUI for configuration, you need to use the dedicated client program: WINBOX. EXE. For example:

Connection Tool

Interface after connecting to RouteOS

When using CLI, you can log on to the RouerOS through TELNET, SSH encrypted remote logon, and CONSOLE local CONSOLE for configuration management.

The knowledge of RouterOS has been introduced to you, and I hope you will gain some benefits.