Today, when Kaixuan was running on the road in the city, he tried its cruise control function and found that its fuel consumption was very low at the speed, about 60 km at the 5l-6l, on the way to drive, I found a car in front of the brakes to slow down, the cruise will immediately exit, the speed slows down, and then the road conditions are better, I want to test the cruise, in the past, the speed was set by pressing the +-Key (that is, the current speed is automatically set after the key is pressed), because the previously used speed (60 km) has been used, and the data is still displayed, when the speed is 40 kilometers, you want to test and directly press the pause key to resume the cruise status. Unexpectedly, when you press the pause (resume) key, after hesitating for about 0.5 seconds, Kaixuan suddenly ran away like a wild horse. He felt very strong and was not prepared yet. Besides, there was a car in front of him, brake immediately to avoid the accident.
Later, I carefully analyzed the constant-speed cruise of Kaixuan. When the set value is too different from the current value, it is suddenly set to return to the cruise status, and Kaixuan will fully accelerate (40 km to 60 km ), the acceleration speed is equivalent to suddenly stepping on the accelerator. If you are not prepared, it is very dangerous. I would like to warn you not to try this dangerous action easily, and try not to use the RST key of the cruise speed, however, you can directly use the brake deceleration to release the fixed speed state. You should also use the following settings to enter the fixed speed state.
In addition, it is best not to use the cruise control function when driving in a city with poor traffic conditions. When using constant-speed cruise, it is necessary to enter the brake preparation status before normal driving to ensure the reaction sensitivity of the brake.
After paying attention to the above points, you can enjoy the comfort and fuel-saving effect of the Triumph cruise.