Family decoration, wardrobe selection skills

Wardrobes play an important role in family decoration. Therefore, purchasing wardrobes is also a problem that troubles owners. In the current building materials market, wardrobes occupy a large part, and their types, colors, and sheet materials are uneven. Aside from the wardrobe craft and color, the most important thing is to look at the sheet metal and hardware. Next, Fuzhou decoration company will share with you the following key points for choosing a wardrobe.
1. plate quality
At present, the surface of the sheet on the market is generally made of melamine as the finish, no paint. The advantage is that the surface of the board is finer, the structure is smoother, and the material is harder. At the same time, it can prevent insects and flame retardant effects. The medium-density board is generally used in the middle. Its density is not lower than 0.80g/cm3, otherwise it will affect the bearing gravity and integrity of the wardrobe; the water content cannot be less than 6.5%, but it cannot be too high. Otherwise, it cannot be adjusted on its own during climate change. The other is the surface technology, which can be used by hand to identify whether it is a float chart or a plane; formaldehyde Content is a matter of interest to everyone. Its release amount should be 1.1 mg/L, which meets the European E1 standard and has a testing report as well. particle board and moisture-proof board should pay special attention. Finally, good plates generally have the anti-ant anti-mildew function.
2. Plate Thickness
The key to determining the cabinet service life is the thickness of the material. About 18mm of the Panel is the general choice of the side panel and Panel of the wardrobe, the back panel may be 9-11mm, relatively thin. It should be noted that the plates used are the same for both the side panel and the backpanel. It is necessary to prevent individual sellers from using good plates on the side panel and the laminate, then, when the consumer does not pay attention to it, the backboard Board board is replaced with a poor one. One way to identify whether the backboard is the same is to try to hit the side panel and the backboard and determine whether it is the same plate based on the feedback.
3. Identify sliding doors of Aluminum Alloy
(1) Hardware aluminum sliding door frame material, to see the cross section bright smooth and Burr-free, the minimum wall thickness requirements to reach a minimum of 1.1.
(2) Whether the key hardware accessories are marked with their own brand anti-counterfeit logo, as well as the weight (such as drawer guide rails ).
(3) push-pull listening sound to determine the pulley quality, but it does not mean that the smaller the sound, the better (may be engineering plastic or nylon); whether the upper rail guide wheel has the adjustment function.

Family decoration, wardrobe selection skills