FAT32 to NTFS and failure Solution

　　I. FAT32 to NTFS

In "run", enter "cmd" to open the "command prompt" window and enter "Convert F:/Fs: NTFS", where "F: "Is the partition drive letter (to be followed by a colon),"/Fs: NTFS "is to convert the specified partition to NTFS format.

1. Conversion failed! If the volume is inconsistent, run the chkdsk disk check tool. In this case, run the chkdsk command as required. Run "chkdsk/?" first /?" View the help of this command and learn that the parameter "/F" is "fixing disk errors ", "/R" is "looking for incorrect sectors and restoring readable information (implicit/F )". Since "/R" implies "/F", you can directly use the "/R" parameter. 2. Run "chkdsk F:/R" to check and repair the f disk.

Figure 1

Figure 2

In addition to the chkdsk dos method, you can also use the Win window method, right-click the disk to be repaired, and select "attribute ", the "tool" option contains the "check error" function. Click "Start Check". In the "check disk" window that appears, check "automatically repair file system errors" and "scan and try to recover bad sectors". 3. You can also check and repair the disk.

 

Figure 3

The repair time depends on the number of files on the disk. If the number of files on the disk is not too large, the repair is completed in seven or eight minutes. Then run "Convert F:/Fs: NTFS ", 4, conversion successful.

Figure 4

　　
Ii. NTFS to FAT32

 

The paragon Hard Disk Manager software allows you to easily and securely change the disk partition format and support Chinese files in the partition. It seems that this is worth a try!

Paragon Hard Disk Manager 6.01.847 Chinese version is installed on the local machine according to the default options. After the program runs, the interface is 5. Look! Many features! But which one is used to convert the partition format? After some exploration, we found the partition format interchange method.

Figure 5

First, in the "Paragon Hard Disk Manager" window, find the disk to convert the partition format, such as the M Disk, right-click it, and select "convert" from the "modify" menu ", in the open "convert" window, select "FAT32" and "6" as the type in "convert to", and click "OK" to return to the "Paragon Hard Disk Manager" window, next, click the "change" button in the toolbar to open the "pending changes" window in 7, and click "Apply" to start the partition type conversion. As the progress bar continues to refresh, the NTFS format will soon be converted to FAT32, 8, and the conversion is successful.

Figure 6

Figure 7

Because the old disk information is still retained in the current system, although the partition format has been changed from NTFS to FAT32, but in the disk attribute window opened, 9, the display is NTFS, however, you only need to restart and the display type is changed. Although NTFS is displayed, the options are missing the unique "security" and "quota" of NTFS format, indicating that the partition format is FAT32.

Figure 9

"Paragon Hard Disk Manager" can not only convert NTFS to FAT32, but also convert the fat format to NTFS, from checking the disk to repairing and then to converting, it is much easier to convert from WINXP.