Fix sleep problem: FlyMe 3.0.2 for MX3 firmware release

A few days ago, there are a lot of friends in the forum feedback said, just bought the MX3 appeared to sleep dead, a serious day to sleep two times. At the time, J.wong said the problem did exist, but the firmware promised on the same day was not honoured. This morning, the Charm clan technology finally released the latest FlyMe 3.0.2 firmware, the most important update is to repair the MX3 sleep problem. At present, the Phantom official website has provided the download of FlyMe 3.0.2, OTA upgrade pushed to start 14:00 today.

Change Details:

Repair some of the mobile phone will sleep death problem;

Repair the problem that the individual area cannot send MMS;

Repair the occasional automatic restart of individual mobile phone problems;

Repair the call recording, micro-communication and so on will appear the problem of distortion;

After the call is repaired, the screen brightness occasionally shows an abnormal problem;

Fix the problem that the Bluetooth call will complain after opening the call recording;

After fixing the unlock, click Smartbar, and it will trigger the problem of return incorrectly.

Repair the call, shielding infrared distance sensor, occasionally can not automatically extinguish the screen of the problem;

The sensitivity of sliding unlock on the home key is optimized under strong light.

Optimize standby endurance;

Precautions:

1 before upgrading, please back up your personal data by FlyMe;

2 before upgrading, please ensure that the battery charge is greater than 20%;

3 MX3 International Version, upgrade to the domestic version, Unicom contract version, may result in application data is incompatible;

4) Brush back version number lower than FlyMe OS 3.0.2 firmware, you must clear the data;

5 Root users must be backed up and clean up the data upgrade;

Upgrade process:

1 Copy the firmware to the mobile phone, in the mobile phone with the document to click on the firmware, you can upgrade;

2 If you need to clear the data, please tick (check, contact, sms, mail, third-party programs and other system files will be deleted, music, photos, videos and other user files will not be deleted);

3 upgrade, do not shut down the machine, the upgrade is completed, the mobile phone will start;

4 Enter "setting"-"about mobile phone", if the display system is FlyMe OS 3.0.2, the upgrade is successful.

Domestic version:

Software Size: 302M

Download Address one: Http://download.meizu.com/Firmware/Flyme/MX3/3.0.2/cn/11324/4a9df693/update.bin

Download Address two: Http://firmware.meizu.com/Firmware/Flyme/MX3/3.0.2/cn/11324/4a9df693/update.bin

Unicom Contract Version:

Software Size: 320M

Download Address one: Http://download.meizu.com/Firmware/Flyme/MX3/3.0.2/wo/11324/f43c26ef/update.bin

Download Address two: Http://firmware.meizu.com/Firmware/Flyme/MX3/3.0.2/wo/11324/f43c26ef/update.bin