First, draw the curtain film:
1, a new graphic element, "curtain", select "Rectangular Tool", no strokes, left color standard #d0c695, right color standard #d9cc97, on the stage to draw a flat long rectangular, painted good in the "properties" will be wide and high set to 466*14.9. The following figure:
Figure 1
Figure 2
Figure 3
2, enlarge the image to 400%, the "view" in the order sheet--the ruler, pull out the two guides as shown below.
Figure 4
With a line tool, stroke color red, very fine, along the top of the auxiliary line, across the graph through the long draw a straight line, and then use the selection tool to point to the two auxiliary line in the middle part of the graph, so that it into a separate state, in the color mixer selected solid color, #A59249, fill. Get the following picture of the screen shape:
Figure 5
Figure 6
Delete the red line.
3, Layer 1 above the new Layer 2, with a line tool, in the attribute set to "solid line", 1 pixels, in the color mixer selected "Strokes", pure color, d9ba81, transparency 70%, in the screen graphics random draw some lines, as the pattern of the curtain. The following figure:
Figure 7
4, now to the curtain punch hole. First pull out several guides for the following illustration:
Figure 8
5, the Layer 2 above the new Layer 3, select the "Oval Tool", set the fill color: Left #333333 transparency 100%, right #666666 transparency 60%, put the cursor on the right side of the screen to the intersection of two auxiliary lines, while holding down the shift and ALT key, draw the following picture of the circle:
Figure 9
Figure 10
6, with the selection tool to point this circle, press Ctrl+d key, so that the same copy of a circle, the copy of the circle pulled to the left side of the two auxiliary line on the intersection point on the alignment, so that the curtain is painted well:
Figure 11
Second, weave bamboo Curtain:
1, a new graphic element, the name "Curtain", in the 1th floor with a rectangular tool, no strokes, pink fill, on the stage to draw a wide-height 550*400 rectangle. (This is only to be able to determine the size of the stage, to be deleted later)
2, on the top of the new Layer 2, the "curtain", The Painted "curtain" components to pull to the first frame of the curtain, open the alignment panel, relative to the stage, center alignment, the upper end and the background of the top line, the following figure:
Figure 12
3, hold down the CTRL key, and then press D key 24, so that the duplicate 24 pieces of the curtain, a total of 25 pieces. (Explanation: Because we set the stage high for 400, each piece of high is 14.9,14.9*25=372.9, a number of some as a gap, just good ha.) Now you see the following graphic:
Figure 13
Figure 14
4, click the Alignment panel in the interval of the "vertical average spacing", is not according to our requirements arranged AH.
Figure 15
5, now to wear the cord. Create a new layer above the curtain layer, name "line", Zoom to 800%, select the Rectangle tool, no stroke color, linear fill, fill color is: Left #d7c9ac, right #7d4d57, in two black holes between the figure of the following picture, and the selection tool to pull the top and bottom of the line to arc.
Figure 16
6, in order to ensure vertical alignment before copying the following line segments, first pull a vertical auxiliary line on the left side of the 1th line. With the selection tool, click the 1th line segment, it into a separate shape, and then hold down the ALT key, and then point to the 1th line, when the cursor appears next to the small + number, drag the mouse down, placed in the 2nd, 3 black hole, the following figure:
Figure 17
7, in the same way, put all the following line lines. So the cord on the right side is dressed. The following figure:
Figure 18
8, right key point "line" layer 1th frame,--copy frame, in the "line" layer above new layer, right key point 1th frame--paste frame. Select the Select tool, hold down the SHIFT key, press the left ARROW key on the keyboard, move the copied segment fast to the left, close to the left black hole, loosen the SHIFT key, and only use the direction key to fine-tune the segment to the exact position. The following figure:
Figure 19
Now the bamboo curtain is ready.
9, put the picture on the curtain, first to import pictures, if it is the previous picture, click on the file in the menu---Import-open the external library, to find the graphic components to use, directly to the library when you can, if the import is a bitmap, preferably in Photoshop First, save as PNG format and then import to the library. Create a new layer below the ' line ' layer, and the name ' figure ' pulls the picture in the library to the appropriate position on the stage and adjusts the size, as shown below:
Figure 20
10, now does not look like the painting on the bamboo, we have to make a mask, in the "curtain" layer above a new layer, the name "mask." Right-click the 1th frame of the diagram layer--Copy the frame, right-click the first frame of the mask layer--paste the frame, and then right-click on the mask layer-the mask layer. is not the gap between the pieces of the picture will not see the ha.
Delete Layer 1 so that the complete curtain is ready.
Figure 21
Third, do the bamboo curtain to pull up and put down the animation:
1, create a new film clip symbol, also in the 1th floor of the 1th frame to draw a 500*400, pink background (of course you can also use other backgrounds), the "background layer." Create a new layer on the top, the name "curtain". Pull the finished curtain element onto the stage and align it all center (that is, center horizontally relative to the stage, centered vertically). Create a new layer on the top, name the mask layer, and use the rectangular tool, no strokes, light yellow fill, in order to be able to see the following graphics, the first to change the transparency to 30%, draw a and the same size of the curtain rectangle, in the property to set the width of 466*400, (also can be high for 480*400, because the wider better) all center alignment. In frame 60th insert keyframes, and then back to frame 1th, with the line tool hold down the SHIFT key, along the top of the 1th curtain below, draw a horizontal line, the graphic separate, with the selection tool to click the following line of the graph, into a separate form, press DELETE key Delete. Delete that straight line, too. Change the transparency of frame 1th and 60th frames back to 100%. Then check the frames of frames 1th and 60th, and then click any frame in the 1~60 to open the Properties panel-tween-shape. So the curtain down the animation is done.
2, do the curtain to put away the animation, point to the 1th frame, hold down SHIFT and point 60th frame, 1~60 frames are black, put the cursor on black, right--copy frame, release Shift key, right key point 100th frame--paste frame. Then hold down the SHIFT key, point 100th and frame 159th, and then, after Black, right-click on it-flip the frame.
Figure 22
Figure 23
Well, it's done, test save it. Write so much, actually do it very simple, beginners can practice, from which you can learn some flash common skills.