Flight Tower Firewall-related configuration commands

The show command for the Flying Tower Firewall FortiGate shows the related configuration and uses the GET command to display live status

Show Full-configuration display current full configuration

Show system global View host name, management port

Display the results as follows

Config system global

Set Admin-sport 10443

Set Admintimeout 480

Set hostname "VPN-FT3016-02"

Set Language SIMCH

Set Optimize antivirus

Set Sslvpn-sport 443

Set TimeZone 55

End

Show system interface View interface configuration

Display the results as follows

Edit "Internal"

Set Vdom "Root"

Set IP 88.140.194.4 255.255.255.240

Set allowaccess ping https ssh snmp http telnet

Set Dns-query recursive

Set Type physical

Next

Get system Inter physical view physical interface State, if no physical parameter can display the state of the logical VPN interface

==[PORT1]

Mode:static

ip:218.94.115.50 255.255.255.248

Status:up

speed:100mbps Duplex:full

==[PORT2]

Mode:static

ip:88.2.192.52 255.255.255.240

Status:up

speed:1000mbps Duplex:full

Show router static View the configuration of the default route

Display the results as follows

Config router static

Edit 1

Set Device "Wan1"

Set Gateway 27.151.120.X

Next

End

Get Router info routing-table static

Viewing static routes in the routing table

s* 0.0.0.0/0 [10/0] via 218.94.115.49, Port1

S 66.72.0.0/16 [120/0] via 88.0.195.130, Huaian

Show router OSPF view related configuration for OSPF

Show system DNS View related configuration for DNS