0x00000a blue screen code Problem and Solution

Recently, my friend said that the system has collapsed and he quickly took a disk and started to reload it.

BiOS settings, optical drive startup, restart, enter the installation interface, and start installation .... Ten minutes later, the installation is complete. After entering the desktop, insert a mobile hard disk and refresh the desktop. Crash .. On the blue screen, the code is 0x00000a. After the restart, the problem still appears after a short time. I asked a friend, but this computer has always existed. Start to solve this blue screen problem.

Go to the official website and check the Code:

0x0000000a: irql_not_less_or_equal

 

 

Analysis: mainly caused by problematic drivers, defective or incompatible hardware and software. from a technical point of view. it indicates that there is an Ethernet internal request level (IRQL) in kernel mode to access the memory address that is not authorized to access.

The solution is as follows:

1: Shut down, unplug all pluggable hardware, and clean all metal feet with an eraser to ensure bright and bright looks.

2: Find the hardware information, download the latest driver from the official website, and check whether the hardware is compatible with the system.

3: Check the system log, start --- run --- eventvwr. msc, enter the Event Viewer, and check the project in which "system log" and "Application log" indicate "error ".

Then restart, and the fault persists. In this case, a hardware error occurs. A memory stick error may occur. Split one from the computer with the same configuration and install it. The fault does not occur again. Done!