Acer 4630z is successfully installed with Emperor macos10.6.5

For many people who want to play with Apple, because they can't afford a relatively expensive Apple Computer, they are ruthlessly blocked from the door, and the running speed on virtual machines is not smooth.

I installed donghuang v3.210.6.5 on the Acer 4630z notebook. Now it is a Mac and Windows dual system. The sound card is not solved, and the other is relatively OK.

1. Installation preparation.

(1) download donghuang v3.210.6.5 (ed2k: // | file | bytes | 2776457878 | 39463ce5411501a118928cc497d9956f | /)

(2) patch the image. Before you patch the PPF image, you are advised to use software or commands to check whether the ISO image to be patched matches the provided highlighted MD5 value. If not, the update fails.

Image MD5 value after patching: 4d7589e87daa660ff697cd4749e6b79b

(3) use an image with the patch. Do not select a disk with a high speed.

(4) Prepare a blank partition and format it as FAT32.

2. CD installation

(1) Put it on the CD and enter busratio = 20 after seeing the boot.

(2) Wait for three or five minutes to enter the installation interface. Select Chinese and next

(3),Format the disk (formatted as the Mac OS X extension log), select the disk tool above,/Erase/

(4) next step, custom options
Select the disk to be installed. Do not rush to install it. In the lower-left corner of the page, see "available". Click "Custom.
(5) \ My Installation Options

Startup options:
Create/extra/COM. Apple. boot. plist
Arch = i386
Timeout = 3
Usbfix = Yes
If you select a specific item, try to select as few as possible. If you are not sure, do not select.
Chameleon RC5 r653
Third-party Kernel
Chocolate kernel (Coco)
Chipset
Nforeata
Jmin

(Since Three Kingdoms emerged at the beginning of installation, I did not select many drivers, such as sound card, Nic, and mouse)

PracticalProgram 

Default value. I chose all.

An error occurred during the last minute of installation:
"Installation failed! Prompt content: the installer failed to start the computer from the disk"

You can use bootthink to start the installation.

3. Dual-system startup

In this case, the Main Boot is damaged and no system can be started.

(1) restore the master boot. Use some Windows installation CD tools to restore the master boot.

(2) Use partition magic Division and other hard disk tools to activate the partition installed in Windows

(3) install bootthink on Windows to start the MAC system.

(4) Enable the hard disk mode of the motherboardAhci. In this way, the Mac can be started normally. If ahci is not installed in windows, enable the ahci mode and enter windows to return to the blue screen.

In this way, we can see the beautiful MAC system!