MAC clone Analysis of the mercury router for some broadband providers, will bind the MAC of the client to prevent users from using the router to access the Internet. If we want multiple people to access the Internet, you need to use the MAC clone function of the router. The following uses the mercury router as an example to describe how to clone MAC. Log on to the Management page of the mercury router, click the left-side navigation bar, and choose network parameters> MAC address clone. You can set the MAC address of the router to the Wan on the interface, as shown in figure.
1. MAC address this option is the MAC address of the WAN port of the router by default. If the ISP provides a MAC address and requires binding the MAC address of the WAN port of the router, you only need to enter the provided value in the "MAC address" column, unless the broadband provider has special requirements, otherwise, you are not advised to change the MAC address. Www.2cto.com 2. the MAC address of the current management computer displays the MAC address of the computer that is currently managing the router.
3. Click "Restore factory MAC" to restore the default value when the MAC address is factory. 4. Click this button to clone the MAC address of the current management PC to the MAC address bar. If the broadband provider needs to clone the MAC address when providing services, this operation should be performed. Otherwise, you do not need to clone the MAC address. After the changes are completed, click the Save button to automatically restart the vro. Only computers in the LAN can use the clone MAC address function. This article is from