Camera System porting process

Getting started with Network Camera-sorting and summarizing the transplantation work:

1. Burn the firmware. There can be many writing methods. The most primitive one is to use fewer simulators, that is, to directly write flash with the simulators provided by chip manufacturers, as a system transplant, it is unnecessary or irrelevant to this burning mode. As a convenience for post-migration and maintenance, automatic upgrades are often added to bootloader.CodeThat is, when the Network Camera is powered on and started, it reads the remote upgrade file through the network to complete automatic upgrade (flash burning and writing ).

 

2. Add support library files and related applications for upper-layer applicationsProgramTo/usr/local/bin.

 

3. Configure the eeprom as a parameter for Camera power-on startup.

 

4. Modify the startup Item to call the mall application.

 

5. Modify the IP address.