Cisco switch password settings www.2cto.com 1. set console password> enable # configure trminal (confing) # line console 0 secure console port ① (config-line) # password (cisco) Secure password (config-line) # login logs must not be small. console Password settings complete exit 2: set the global password www.2cto.com enadle # configure terminal ② (config) # enable secret (class) login Password (config) # login global password settings complete exit 3. set the remote login password enable # config terminal (config) # line vty 0 4 (0 4 is the port) ③ (config-line) # password (class) login Password (config-lline) # l Oginexit 4. Save the above Settings> enadle # copy running-config strat-config the Cisco switch password cracking secret connects the console port of the switch to the terminal or the PC simulation terminal. Use no Modem
Connects the serial port of the PC to the console port of the switch. The supervisor needs to unplug the power first, because there is no switch on the Cisco switch, so we can only unplug the power.
What we need to do next is to press the MODE button and plug in the power and other port indicators to kill and release the fuse to initialize flash. > Flash_init secret: Rename the configuration file containing the password. > Rename flash: config. text flash: config. old restart start the switch. > Boot into privileged mode. > Enable Disable password is ignored when the instance is started. Www.2cto.com # rename flash: config. old flash: config. text upload copy configuration file to the current system. # Copy flash: config. text system: running-config ← modify the password. # Configure terminal # enable secret to save the configuration. # Write