Cisco Wireless AP initial configuration IP Address

What is the configuration of Cisco Wireless AP? What is the specific operation? The following articles provide reference for several methods.

No IP address is configured for the Cisco Wireless AP ethernet interface. It is used as a dhcp client. How can I configure it through the web? There are several methods:

1. Connect to the ap console port through the console line and enter the configuration mode: interface BVI1 can be configured with an IP address, and then configured through IE. We recommend that you use the console line first .)

2. a dhcp server is set up internally to connect to the dhcp server through the AP's Ethernet, view the MAC address at the bottom of the AP, and then view the IP address obtained from the MAC address on the dhcp server, you can configure it on the web page. If no console exists and dhcp server exists, this method is recommended .)

3. If there is no console on hand and no DHCP server is set up, you can use a single computer to connect to the AP's Ethernet interface through the ethernet cable and configure the IP address of the computer as follows: ip address: 10.0.0.2, which can be managed through the WEB network. Applicable only to 1100 Series)