Computer Desktop Clean Little knowledge

Some computer malfunctions, often due to more dust in the machine, which requires us to observe the failure of the machine inside and outside whether there are more dust, if it is, should be first to dust, and then follow-up judgement maintenance. In the dust removal work, the following aspects should pay special attention to:

1, pay attention to the clean air duct

2, pay attention to the cleaning fan

In the process of cleaning the fan, it is best to remove the dust, to be able to point a little clock oil in the fan shaft, and to enhance lubrication.

3, pay attention to plug, seat, groove, plate card gold finger part of the cleaning

The gold finger clean, may use the rubber to wipe the gold finger part, or may use the alcohol cotton to wipe.

Plug, seat, groove metal pins on the removal of the oxidation phenomenon: one is to wipe with alcohol, one with metal pieces (such as a small screwdriver) in the metal pin gently scraping.

4, attention to large-scale integrated circuits, components and other pins in the cleaning

Clean, apply the brush or vacuum cleaner to remove dust, at the same time to observe the PIN has no virtual welding and damp phenomenon, the components are deformation, discoloration or leakage phenomenon.

5, pay attention to the use of cleaning tools

Cleaning tools, the first is anti-static. such as cleaning with the brush, should use natural materials made of brush, disable plastic brush. Second, if the use of metal tools to clean, must cut off the power, and metal tools to discharge static electricity treatment.

Tools for cleaning include: brush, fur tiger, vacuum cleaner, rag, alcohol (not used to wipe the chassis, display, etc. plastic shell).

6, for the more humid situation, should find ways to make it dry and then use. Available tools such as electric fans, hair dryers, etc., can also let its natural air-dry.