Computer how to reload system, computer reload system 10 Big steps

Computer system crashes how to do, how to reload the computer system? This tutorial introduces the ten steps of computer reload system.

1, turn on the computer power, CD-ROM into the installation of XP CD-ROM, and then hold down the del into the BIOS, first set up CD-ROM for the 1th start! If you are prompted for the Boot from CD, click Enter.

2, into the Start screen, choose to install WinXP, press ENTER on the installation! The Press any key to Boot from CD may appear when you press ENTER, or the hard drive will start by clicking Enter.

3, select the 1th, press ENTER, began to install, read the driver to memory.

4, after loading drive, you can see the partition of your hard disk, it is recommended to install C disk. Note here that if you want to install a new one, then you need to format it, so the key to formatting is to remove the C disk first. The only XP that is installed is the new XP. So please move the cursor to C and then press "D" to delete the partition C.

5, you press the "D" (delete), XP will confirm, because of fear you delete the wrong, prompted to delete the data will be lost. Of course, I just want to format and then install, so please press "enter" to continue, press "L".

6, after the deletion, the C disk will become an unpartitioned division! Press "enter" to continue.

7, here will let you select the disk format. Let me say the difference between NTFS and FTA: First, NTFS has all the benefits of fat, NTFS is less than fat fragments, security is high, can encrypt files, support disk quotas, support more than 30G partition, support compression, maximum compression 50%. I like to use NTFS and defragment the disk very quickly. However, NTFS has a high security, so NTFS partitions cannot be accessed under DOS and cannot be formatted for boot floppy disks, only XP discs can be formatted. So, if you are not clear, it is recommended to use FAT. The following 4 choices (quick) indicate a quick format.

8, press "enter" to continue. is in the format of.

9, the installation began. CD-ROM installation is automatic, from the beginning to the end, estimated to take 20-30 minutes. Familiar with the installation screen.

10, installed well, the 1th time reboot.