Connect the mobile phone to the zxv10 h618b router through WiFi, but the problem cannot be solved.

A friend of mine helped me get a zxv10 h618b vro a few days ago. At first, I needed 12 V power supply, but I had to leave a 12 V output DC charger. The key time was used. First, I probably downloaded the user manual for this vro, it was found that products of the past 08 years have been around for five years.

 

Start with the question. For the WAN interface of the router connected to the Internet network cable, select one port from lan1, lan3, and lan4 to connect to one end of the other network cable, and the other port to connect to the network port of the PC, after power-on, the PC can access the Internet normally. Although the mobile phone can search for and connect to the vro, the mobile phone cannot access the Internet. It should be because the router has not configured the WLAN, and the attempt process is recorded below:

 

Open 192.168.1.1 and log on to the China Telecom terminal with the Super User telecomadmin and password ne7ja % 5m. Select "network"> "Broadband Settings" and check the two connections in the "connection name" drop-down box, I couldn't remember it. Select "create WLAN connection", for example:

 

Figure 1

Is the part behind this page

Figure 2

This problem can be solved in this setting, but the problem persists after you change figure 1 to figure 3:

Figure 3

It cannot be changed to DHCP:

Figure 4

 

You can also change to the Bridge Mode.

Figure 5