Datamax I-4260 printer can not print barcode in PRMS

Today, I encountered a case where the printer could not print barcode.

ProgramUse a batch processing file print. bat. The content is Copy D:/DRP ltp1

The problem is that the printer can be printed on another printer, and the other one cannot be printed (The problem is that the print command is issued, and the printer blinks but no output is printed ).

Go to the FAB and check the model. The datamax instance cannot be printed, and the zebra instance can. We suspected that there was a problem with the printing settings, or the printer model.

Back to office, I found the official datamax document based on the model and confirmed my previous ideas. This Type printer does not support the copy printing method, and other printing methods can be used in place. At present, the reason has been clarified, but the solution remains to be determined. The document is here:

Http://www.fjboxin.com/dispTable.asp? Bs_download id = 100

This method is not supported.

 

To sum up this case, the problem cannot be printed. It may be encountered in the future when the new program goes up.

1. Try another machine to print the program.

2. If you can print anything else, first try to use another standard program to print the machine.

3. If other programs can print, check whether the port corresponding to the content sent by our program can correspond to this printer (because of a flash, it must correspond to this machine)

4. In this case, only the commands sent by the program are inconsistent with those set by the printer, or the printer does not support the commands sent by our program.

 

Check whether the printer does not support the commands we send. In this case, the printer of different models may have different situations. Make a record for future reference.