Dell m630 Blade Server Gigabit NIC is not adaptive

The unit's new Add 5 Blade service card, 3 M630 and 2 M820. My system is loaded with Windows 2008R2

One of the M630 today temporarily said to connect the public network and to distribute the network IP, do a good network cable and external network connection, with the laptop input public IP after the test is normal, but even on the M630 network card even lights are not bright, it is called an egg pain.

Toss for a long time to find out why:

I just server regardless of the network, later discovered that the Cisco switch is 100M port, and the Dell M630 Blade is a gigabit network card, and is not adaptive down to 100m, enough wayward! Find the network engineer, change the gigabit switch, OK.

This article is from the "10999243" blog, please be sure to keep this source http://11009243.blog.51cto.com/10999243/1757598

Dell m630 Blade Server Gigabit NIC is not adaptive