Diamond mobile phone: flight mode and Shutdown Alarm

Flight mode and Shutdown Alarm
The so-called flight mode refers to turning off the signal part of the mobile phone. Keep your phone on, instead of making phone calls, text messages, and surfing the Internet. This was originally intended to meet the requirements of phone numbers on the plane that are not allowed to start up.
When we select the flight mode, the power consumption of mobile phones is much smaller. Because the WM system is slow to start and shut down, it usually does not frequently switch on or off the machine. We use the flight mode to simulate the shutdown status. In this way, people can only get the prompt that your phone is shut down.
Dedicated software can enable the mobile phone to automatically enter or exit the flight mode. For example, autoflight. Now there is software to simulate the super flight mode. The principle is to let the mobile phone contact the signal base station for a long time. Simulate the effect that the phone cannot be connected. For example, qptool.
 
Due to operating system restrictions, the WM system does not support shutdown for now. We can only use the automatic flight software to turn off the phone signal and increase the standby time. Use the alarm software to set the alarm. Of course, the functions that can be achieved at this time are very powerful.
This post is from the group musicCommunityHttp://q.yesky.com/group/review-10867812.html