Dlink router settings-physical connection of the router
For example, there are four types of routers: LAN, WAN, reset, and power supply. A lan is a computer used to connect to a LAN. a wan is used to connect a cat or other Internet lines. The reset button is used to reset the router program.
Network Connection Dlink router settings
Dlink router settings-Client IP Address Settings
Right-click "Network Neighbor"-"attribute"
Right-click "Local Connection" on the connection router-"properties"
Select "TCP/IP" in the "local connection" attribute and click "properties"
In "TCP/IP", you can select "automatically obtain IP addresses" or manually enter an IP address segment, generally, if the IP address of the DLINK router is 192.168.0.1, the IP address must be 192.168.0.X2-254"
Test whether the connection is communicating with the vro. In "start"> "run", enter ping192.168.0.1 and click "OK"
The following figure shows that you can communicate with the vro.