DLink router can not login router management interface how to set

First landing router interface, it is recommended that the computer and the router to connect with a network cable, configured after the router, can unplug the connection between the computer and the router, wireless connection to the Internet.

Can not enter the router interface, the solution:

1, check the network connection

Broadband cable Router Internet port, the computer connects the Router 1, 2, 3, 4 any LAN port, the routed power source is energized. Make sure that the corresponding LAN port lights are lit, if you do not check the connection or replace the computer to the router LAN port network cable

2, Confirm Login Management interface method is correct

Open the browser, enter http://192.168.0.1 in the Address bar, return. Login to enter the router interface, user name: admin, no password.

3, the problem of troubleshooting IE browser

1 Open IE Browser, click "Tools", click "Internet Options", click "Connect" and select "Never dial Connection". Click on "LAN Settings" to ensure that the front of the small hook do not tick.

A

B

C

2 Click "General", click "Delete ...", delete the following information.

A

B

4, test can enter the 192.168.0.1 interface

1 Ensure that the computer IP settings are correct

Computer IP settings for automatic access to IP, please refer to: How to set up the Windows operating system to automatically obtain IP?

2) Reset the router

The router is released with a sharp object (such as a toothpick) holding down the router's reset hole for 8 seconds in a powered state. such as router power and wireless light on, and then test whether to enter the http://192.168.0.1. (Note: Low time and 5 seconds above 10 seconds may result in unsuccessful reset)

3) Restart the router

The router's power off, such as a small will be plugged in the power supply, such as power lights are often bright, wireless light after the start of the completion. Re-test can enter 192.168.0.1.

4 change the browser or computer

Replace the browser landing, if you still do not login recommended to replace other terminal connection router settings, such as using a mobile phone or pad wireless connection router to set up.