Graphics driver not installed properly

In the process of installing the graphics driver, the computer often prompts for the failure of the installation, and the driver with different versions will not solve the problem.

This situation can be resolved according to the following methods:

1. In the process of starting the computer, enter the BIOS settings inside, in the Chipset Features setup option, the inside of the Assin IRQ to VGA set to enable, and then save. Many graphics cards when this item is set to disable, the driver is not properly installed.

2. After installing the system, be sure to install the motherboard chipset patch.

3. Install the driver, after entering "Device Manager", right-click the name of the video card under "Show Cards", right-click the "Properties" command, go to the video card properties, click the "Driver" tab, click "Change Driver", and select "Show a list of known device drivers to select a specific driver". After the eject driver, select "Install from Disk", click "Browse", locate the folder where the driver is located in the pop-up Lookup dialog box, click "Open" and then OK.

If the video card is installed, not installed in place, will also cause driver installation errors, so when installing the video card, pay attention to the card's gold fingers to fully insert the video card slot.